FAN AS-BLOWER 3548025 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02134048
Disconnect harness assembly (1) .
Remove variable valve actuator oil pressure sensor (2) .
Remove the O-ring seal from the variable valve actuator oil pressure sensor.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seal for damage. Replace the O-ring seal if any damage was found.
Install variable valve actuator oil pressure sensor (2) in reverse order.
Tighten variable valve actuator oil pressure sensor (2) to a torque of 10 2 N m (89 18 lb in).