FAN GP-BLOWER 4204578 - Caterpillar

P7 Charge Pressure
Illustration 7 g02712605
Location of the P7 pressure tap
The P7 pressure tap is located on the left side of the machine, below the ladder.P8 Charge Fill
Illustration 8 g02712613
Location of the P8 pressure tap
The P8 pressure tap is located on the left side of the machine, below the ladder.P9 Gearbox SOS Gage
Illustration 9 g02712623
Location of the P9 pressure tap
The P9 pressure tap is located on the left side of the machine, below the operator station and near the front drive shaft.P10 Hystat Fwd Drive Pressure
Illustration 10 g02712637
Location of the P10 pressure tap
The P10 pressure tap is located on the right side of the machine, in front of the rear wheel.P11 Hystat Rev Drive Pressure
Illustration 11 g02712680
Location of the P11 pressure tap
The P11 pressure tap is located on the right side of the machine, in front of the rear wheel.P12 Hydraulic SOS Gage
Illustration 12 g02712685
Location of the P12 pressure tap
The P12 pressure tap is located on the left rear of the machine, near the hydraulic fan.P13 Gearbox Pressure
Illustration 13 g02712687
Location of the P13 pressure tap
The P13 pressure tap is located on the left side of the machine, behind the ladder and above the front drive shaft.P14 Lube Pressure
Illustration 14 g02712689
Location of the P14 pressure tap
The P14 pressure tap is located on the left side of the machine, behind the ladder and above the front drive shaft.P15 Clutch Pressure
Illustration 15 g02712691
Location of the P15 pressure tap
The P15 pressure tap is located on the left side of the machine, behind the ladder on the side of the gear box.P16 Front Service Brake Pressure
Illustration 16 g02712703
Location of the P16 pressure tap
The P16 pressure tap is located on the underside of the operator station, next to the HMU. The test port for the bottom is for the front brakes.P17 Rear Service Brake Pressure
Illustration 17 g02712695
Location of the P17 pressure tap
The P17 pressure tap is located on the underside of the operator station, next to the HMU. The test port on the top is for the rear brakes.