FAN GP-CONDENSER 4473909 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00976014
Disconnect harness assembly (1).
Remove engine oil pressure sensor (2).
Remove the O-ring seal from the engine oil pressure sensor. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00976014
Install a new O-ring seal on the engine oil pressure sensor. Lubricate the O-ring seal with clean engine oil.
Install engine oil pressure sensor (2). Tighten the engine oil pressure sensor to a torque of 10 N m (89 lb in).
Connect harness assembly (1).
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge.