FAN 4873310 - Caterpillar

Removal Procedure
Illustration 1 g02798190
Disconnect harness assemblies (1) and (2).
Illustration 2 g02798192
Disconnect tube assemblies (3).
Remove bolts (5) and remove fuel manifold (4).
Illustration 3 g03356369
Remove adapter assemblies (6). Remove sensors (7) and the O-ring seals.
Remove solenoid valves (8).
Remove cap (10) and remove connector assembly (9).
Illustration 4 g02798209
Remove nut (15 ), washer (14), and solenoid (13).
Remove cartridge assembly (12) and remove O-ring seals (11). Installation Procedure
Install fuel manifold (4) in the reverse order of removal.
Tighten nut (15) to a torque of 20 2.5 N m (177 22 lb in).
Tighten solenoid valve (8) to a torque of 50 5 N m (37 4 lb ft).
Tighten connector assembly (9) to a torque of 30 3 N m (22 2 lb ft).
Tighten cap (10) to a torque of 7.0 2.5 N m (62 22 lb in).
Tighten sensors (7) to a torque of 30 3 N m (22 2 lb ft).
Tighten adapter assemblies (6) to a torque of 17 1.5 N m (150 13 lb in).