FAN & BAFFLE AS 9S2258 - Caterpillar

Illustration 1 g01444855
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the entire package. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted.Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.Lifting eyes are designed and installed for each package. Alterations to the lifting eyes and/or the package make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Caterpillar dealer for information regarding fixtures for proper lifting.Lifting the Entire Package
Do not use the engine lifting eyes or the generator lifting eyes to lift the entire package. Lifting points (3) have been provided on the base of the generator set and the front lifting eye on the engine for lifting the entire package. However, lifting the engine and the generator together requires special equipment and procedures. Consult your Caterpillar dealer for information regarding fixtures for proper lifting of your complete package.Lifting the Engine Only
To remove the engine only, use lifting eyes (2) that are on the engine.Lifting the Generator Only
Note: The control panel and the terminal will need to be removed before you attempt to lift the generator.Consult your Caterpillar dealer for information regarding proper fixtures and lifting devices.To remove the generator only, use the appropriate lifting eyebolt at location (1). Ensure that the lifting eyebolt is correctly oriented on the generator. The lifting eyebolt may stretch when the generator is lifted. This may cause the locking nuts to loosen. This could cause the lifting eyebolt to swivel. Ensure that the lifting eyebolt is tightened to the correct torque before you lift the generator.