FASTENER GP-GOVERNOR 1098024 - Caterpillar

Illustration 1 g02105875 (B) As required, use 9G-9295 Shim Pack to obtain the end play 0.03 to 0.06 mm (0.001 to 0.002 inch). Thickness of one shim pack ... 2.2 mm (0.09 inch) (1) Lubricate the bores for the O-ring seals lightly with the lubricant that is being sealed. (2) Apply 4C-9506 Retaining Compound to the outer diameter of the special tapered cup. (3) Apply 4C-4030 Thread Lock Compound to the threads of the bolts. (F) Installation depth of the cup plug from the surface ... 1.25 0.25 mm (0.049 0.010 inch) (G) As required, use 138-0428 Shim Pack in order to obtain the clamping between the cover and the bearings to 0.00 to 0.08 mm (0.000 to 0.003 inch). Thickness of one shim pack ... 1.17 mm (0.046 inch) (4) Torque for two locking bolts ... 300 25 N m (221 18 lb ft)
Illustration 2 g02105617
Section E-E
(5) Torque for the bolts ... 1125 100 N m (830 74 lb ft) (6) Torque for the locking bolts ... 130 15 N m (96 11 lb ft)Note: Apply 4C-5599 Anti-Seize Compound on the face and the threads of the bearing nut. (7) Torque for the bearing nut ... 2375 300 N m (1752 221 lb ft) (8) As required, use 119-3380 Shim Pack to obtain the end play 0.03 to 0.08 mm (0.001 to 0.003 inch). Thickness of one shim pack ... 3.22 mm (0.127 inch) (9) As required, use 119-3380 Shim Pack to obtain the backlash for the bevel gear of 0.48 0.12 mm (0.019 0.005 inch) : Thickness of one shim pack ... 3.22 mm (0.127 inch)Use the following procedure to obtain the backlash:
Adjust the thickness of the shim pack in order to obtain the desired backlash.
Measure the backlash on three equally spaced teeth.
The three measurements should be within 0.15 mm (0.006 inch) of each other.