FASTENER GP-CYLINDER HEAD 1310421 - Caterpillar

Illustration 1 g00854172
Secured "SETUP" Screen (1) Button for "LOG IN" (2) Icon for logged out (3) Button for "LOG OUT" (4) Button for "TOOLS" (5) Button for "MFR COOLDOWN" (6) Button for "HELP" (7) Button for scrolling in the UP direction (8) Indicator for the current value (9) Indicator for the new value (10) Arrow for selection (11) Button for scrolling in the DOWN direction (12) Button for "EDIT" (13) Button for the "SETUP" screenThe "SETUP "screen is accessed by touching the button for the "SETUP" screen (13). This button also appears on the "MAIN" screen. The operating parameters that do not require a password may be configured from the "SETUP" screen.The parameters are viewed by scrolling through the list. Use the button for scrolling in the UP direction (7) or use the button for scrolling in the DOWN direction (11). The selected parameter is indicated by the arrow for selection (10). The current parameter value is displayed in the indicator for the current value (8) .If the parameter is adjustable the button for "EDIT" (12) is enabled. If this button is pressed, a numeric keypad will appear and a new value may be entered. The new value will be displayed in the indicator for the new value (9). In order to set the value, the operator must touch the "ENTER" button that is located on the keypad. The minimum limit and the maximum limit are checked in the program. The new values are entered if the values are within the limits of the program. The minimum and the maximum values may be viewed by touching the button for help (6) .Parameters in the list that are marked with an asterisk are secured. The operator must be logged into the system in order to gain access. This is done by entering the password. The password is a 4 digit number. The default password for the system user is 1234. The password can be changed. The name of the active user is displayed. A parameter is secured if a graphic symbol of a closed padlock is displayed to the right of the button for "LOG IN" (1). The parameter cannot be changed if the Icon for logged out (2) is present. A parameter is unsecured if an unlocked graphic appears. The user can be logged out by touching the button for "LOG OUT" (3). The user may be logged out by leaving the touchscreen display idle for ten minutes.The button for "TOOLS" (4) will display the screen that is used in order to configure the characteristics of the touchscreen display.Operating Parameters (Low Voltage Switchgear)
Table 1
Parameters For Operation    
Operating Parameter     Description     Minimum     Maximum     Typical     Unit    
Base Load     This is the value that is used for base load control. This is not active when the unit is in STANDBY mode.     110% of the unload setpoint     100% of the genset nameplate         kW    
Unload