FASTENER GP-SWING & FINAL DR 1484682 - Caterpillar

Illustration 8 g00851715
Disconnect grease line (4) and remove retainer (5) .
Illustration 9 g00851716
Disconnect grease line (6) and disconnect line (7) .
Illustration 10 g00851718
Remove pin (8) from yoke (9) .
Disconnect grease line (11) and remove retainer assembly (10) .
Illustration 11 g00851722
Disconnect nine tube assemblies (12) and remove clamp (13) .
Illustration 12 g00851723
Remove nut (15) and remove bolts (14) .
Illustration 13 g00851725
Remove two tube assemblies (17) and disconnect three hose assembly (18). Disconnect bracket (16) and move out of the way.
Illustration 14 g00851726
Remove servo assembly (19) .
Illustration 15 g00851727
Disconnect grease lines (20) and remove retainers (21) .
Illustration 16 g00851728
Disconnect grease lines (22) and remove retainer (23) .
Illustration 17 g00851729
Disconnect three lines (24) and remove bolts (25). Swing lines out of the way.
Illustration 18 g00851730
Install Tool (G) and a chain. Install Tool (H) and remove the pin. The weight of the pin and Tooling is 36 kg (80 lb).
Illustration 19 g00851731
Install Tool (H) and remove the pin.
Illustration 20 g00851732
Attach a suitable lifting device and remove link (26). The link weighs 82 kg (180 lb).
Illustration 21 g00851733
Attach a suitable lifting device to load cylinder (27) .
Illustration 22 g00851734
Install Tool (I) and partially remove the pin in order to remove the load cylinder.
Remove the load cylinder. The load cylinder weighs 82 kg (180 lb).