FASTENER GP-FUEL INJ PUMP 1W7376 - Caterpillar

href="https://avspare.com/spare/caterpillar/4167134/">4167134 SEAL-O-RING
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 11% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
Reasonable travel and mileage is authorized. On vessels with multiple affected engines this service letter should completed on all engines on the vessel on the same trip. Please reference the other engine serial numbers in the claim story.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
STEP 1: Remove the 276-7630 Turbocharger Shield if equipped. Refer to Special Instruction, REHS3425, "Installation of the 276-7630 Turbocharger Shield Group" for assembly instructions details.
STEP 2: Remove the 324-8082 Elbow and 324-8080 Tube on the RH side of the engine as shown in Image 1.2.1.
Image1.2.1
STEP 3: Replace the existing 112-3540 O-ring seals with new 416-7134 O-ring seals as shown in Image 1.3.1. P-80 Assembly Lubricant is recommended to aid in the assembly of O-ring seals.
Image1.3.1
STEP 4: Reinstall 324-8082 Elbow and 324-8080 Tube.
STEP 5: Remove the 324-8080 Tube and 328-9713 Elbow on the LH side of the engine as shown in Image 1.5.1.
Image1.5.1
STEP 6: Replace the existing 112-3540 O-ring seals with new 416-7134 O-ring seals as shown in Image 1.6.1. P-80 Assembly Lubricant is recommended to aid in the assembly of O-ring seals.
Image1.6.1
STEP 7: Reinstall 328-9713 Elbow and 324-8080 Tube.
STEP 8: Reinstall 276-7630 Turbocharger shield if equipped. Refer to Special Instruction, REHS3425, "Installation of the 276-7630 Turbocharger Shield Group" for assembly instructions details.