FASTENER GP-ENGINE WIRING 2389384 - Caterpillar

Illustration 1 g03106676
Top view
Table 1
Specification for 380-5013 Accessory Drive Gp
Item Qty Part Specification Description
1 1 7C-3257 Thrust Washer Thickness of new thrust washer is 7.00 0.15 mm (0.276 0.006 inch).
2 1 7N-2047 Dowel Protrusion of the new dowel from thrust washer surface is 4.5 0.5 mm (0.18 0.02 inch).
3 1 116-3242 Idler Gear As After assembly, bore in the 116-1365 Bearing is 105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth is 2.3 0.5 mm (0.09 0.02 inch).
Diameter of the new shaft (5) is 105.880 0.020 mm (4.1685 0.0008 inch).
4 1 245-6202 Pump Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
6 1 259-4598 O-Ring Seal before assembly, lubricate the bore with the lubricant that is being sealed.
7 2 7N-5246 Thrust Washer Thickness of new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).