AVSPARE.COM
parts catalog

FASTENER GP-BRACKET 3461566 - Caterpillar



3461566 FASTENER GP-BRACKET Caterpillar parts C18 FASTENER
Rating:
15
Alternative (cross code) number:
CA3461566
346-1566
3461566
Caterpillar 3461566 FASTENER GP-BRACKET

Buy FASTENER GP-BRACKET 3461566 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET, MARINE ENGINE,

Compatible equipment models: 3461566:

GENERATOR SET  C18  
MARINE ENGINE  Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

(19) Transmission And Rear Axle Housing
1. Observe oil level at filler opening at rear of axle housing. 2. Maintain oil level to top of filler neck.(20) Brake Cylinder
1. Remove cover located at right of base of power control box.2. Remove filler plug in top of reservoir housing. Clean plug. 3. Maintain fluid level 1/2 inch below filler opening. Install filler plug and cover.(21) Rear Axle Bracket Caps
Lubricate 1 fitting in cap on each side. Total 2 fittings.(22) Pedal Bearings, Power Control Drive Shaft And Engine Mount
Lubricate 4 fittings located below operator's compartment.(23) High-Low Lever
Lubricate 1 fitting at lower end of lever.(24) Gear Selector Rod
Lubricate 5 fittings, one fitting each in gear rod pivot, yoke, front socket, cross shaft bearing and rear socket bearing.(25) Governor Linkage
Lubricate 3 fittings.Lubricate 1 fitting in block below operator's compartment, at right side. Lubricate 1 fitting in each of 2 blocks at rear of engine, one on each side.(26) Fan Bearing
Lubricate 1 fitting until grease appears at relief valve.(27) Alternator And Fan Drive Belts
1. Inspect condition and adjustment of fan and alternator belts.2. Belts should deflect 7/8 inch (22 mm) under 25 lbs (11.5 kg) force. Initial installation new belts-3/4 inch (19 mm).To Adjust Belts
Loosen mounting bolts and move alternator in or out as required. Tighten bolts.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts fastener Caterpillar catalog:

2431159 FASTENER AS
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 627F, 627G, ...
6I4025 FASTENER GP-CYLINDER HEAD
24M, 3406B, 3406C, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G...
1065673 FASTENER GP-CYLINDER HEAD
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
4P2543 FASTENER
C11, C13, C18, C9, C9.3, CG137-08, CX31-C13I, TH31-E61, TH35-C11I, TH35-C13I
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.