FASTENER GP-FUEL TANK 3795445 - Caterpillar

Reference
Table 1
Document     System    
Operation and Maintenance Manual, SEBU8161     "K" Series
"N" Series
"R" Series
Track-Type Tractors    
Operation and Maintenance Manual, SEBU8276     "M" Series
Motor Graders    
Systems Operation, Testing and Adjusting, KENR6329     "K" Series
"N" Series
"R" Series
Track-Type Tractors    
Systems Operation, Testing and Adjusting, KENR6333     "M" Series
Motor Graders    
Special Instructions, REHS3250     "K" Series
Track-Type Tractors    
Special Instructions, REHS3251     "N" Series
Track-Type Tractors    
Special Instructions, REHS3252     "R" Series
Track-Type Tractors    
Special Instructions, REHS3253     "M" Series
Motor Graders    AccuGrade® Version 10.0
The AccuGrade® Version 10.0 has been released. This system update consists of both hardware and software releases. The new AccuGrade Version 10.0 Software will be shipped with new Electronic kits for AccuGrade Laser / Sonic / Cross Slope. The software functionality is the same as Version 2.04 for motor graders with several enhancements. The software has been updated to allow the system to utilize the 283-9530 Monitor Display Group (CD610) Display. New AccuGrade system hardware components consist of AccuGrade CD610 v.10.0 on-board software that supports the following AccuGrade technologies:For Caterpillar Track-Type Tractors:
Single Laser
Dual LaserFor Caterpillar Motor Graders:
Cross Slope
Single Sonic and Cross Slope
Single Laser and Cross Slope
Dual LaserKey features and benefits of the AccuGrade CD610 v.10.0 on-board software include the following:
Support for new AccuGrade Attachment Ready Option Machines (ARO)
Supports new AccuGrade components
Track-type tractor and motor grader CD610 display interchangeable
Change display language without new firmware
Additional language support283-9530 Monitor Display Group (CD610)
Illustration 1 g01346285
Description
The Display is a computer that runs the AccuGrade Version 10.0 software. The Display has an LCD screen in order to show guidance information and other information. The Display has push buttons that are used to operate the AccuGrade System. Refer to the referenced publications for additional information.Features
Designed for rugged, on-machine use
Dimmable buttons and screen for night work
Better tactile feel
Larger screen
More internal memory
Software upgradeable through Cat Electronic Technician (Cat ET)Activation of the 283-9530 Monitor Display Group (CD610)
Note: Refer to the Reference section in order to obtain the correct Special Instruction for the procedure for activating the Display.The AccuGrade display must be registered and activated by the dealer before the AccuGrade system can be used. When you register the display, you will receive a unique registration key that will be used in order to activate the Display. This registration process will allow for the Display to be upgraded as newer versions of software are released.Setup of the 283-9530 Monitor Display Group (CD610)
In order to setup the Display, refer to the Reference section in order to obtain the Special Instruction for the machine type for proper display setup and machine setup.Note: Some machine types may require a Software Enable Attachment (SEA) in order to activate the Electro-Hydraulics for AccuGrade.Required Software
Table 2
Component        Version    Firmware    
226-9170 Sensor Assembly     AS400     1.94     2962868 (AS400 194).fls    
244-1714 Sensor Group     RS400     1.89     28451700 (RS400 189).fls    
226-2334 Laser Receiver Group     LR400     1.83     297015400 (LR400 183).fls    
291-1913 Receiver Group     LR410     1.88     292126800 (LR410