FENDER GP-FRONT 1554220 - Caterpillar

Windshield Wiper/Washer
Front Windshield Wiper/Washer (1) - Turn the knob to the right to turn on the wiper. First click is low speed. Second click is high speed. Left Hand Door Windshield Wiper/Washer (2), Right Hand Door Windshield Wiper/Washer (3) or Rear Windshield Wiper/Washer (4) - Operates the same as item 1. Rotate the windshield washer pointer to the window that requires washing.Push (1), (2), (3) or (4) knob to spray the windshield. Pointer is located on cab ceiling.Windshield Washer Fluid Bottle
The washer fluid bottle is located on the left rear side of the machine next to the cab. Look at the bottle to check quantity. Remove the bottle cap to add fluid.Use Caterpillar windshield washer fluid or a commercially available windshield washer fluid to prevent system from freezing.Heating and Air Conditioning Controls
1. This switch activates the heat or air conditioning and controls the three speed blower fan motor. Off - Turn the knob to this symbol to turn off all controls. Heating - Turn the knob clockwise from OFF to activate. Air Conditioning - Turn the knob counterclockwise from OFF to activate. First Speed (I) - Move the knob to this symbol for lowest fan speed. Second Speed (II) - Move the knob to this symbol for a medium fan speed. Third Speed (III) - Move the knob to this symbol for highest fan speed. Heating Variable (2.) - Turn the knob anywhere between LOW (left) and MAXIMUM heat (right.) Air Conditioning Variable (3.) - Turn the knob anywhere between LOW (left) and MAXIMUM cool (right).Heating and Air Condtioning System Operation
The Heating and Air Conditioning system can perform four functions: Heating (1.) - Turn the blower fan switch to FIRST, SECOND or THIRD speed clockwise from OFF. Adjust the heating control for the desired temperature. Cooling (2.) - Turn the blower fan switch to FIRST, SECOND or THIRD speed counterclockwise from OFF. Adjust the cooling control for the desired temperature. Pressurizing (3.) - Pressure inside of the cab will help keep dust out, when heating or cooling is not desired.Turn blower fan to either FIRST, SECOND or THIRD speed clockwise from OFF, depending on the volume of air needed to keep out dust. Turn the heating control to LOW (left). Defogging (4.) - It is possible to use the heating system, with the air conditioning system to remove moisture from the air in the cab. This will prevent moisture from forming on the windshield and windows.Turn on the blower fan and the air conditioning. Adjust both the heating and cooling knob control until moisture level is lowered, the temperature is comfortable and windshield and side windows are free of moisture.Horn
Horn - Push the knob down to sound the front horn. The horn is used to alert people in front of the machine.Fuses and Circuit Breakers
Raise the battery box cover and open the fuse cover.
Always replace fuses with ones of the correct ampere rating to avoid electrical system damage.
Fuse - Replace any fuse if the