FENDER ASSEM. 1S4989 - Caterpillar

Illustration 2 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
Seat Belt (2)This safety message is located below the steering wheel.
Illustration 3 g01370908
For machines that are equipped with a ROPS, a seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.For machines that are NOT equipped with a ROPS, falling from a machine could cause serious injury or death. Seat belts should be worn when driving the machine on public roads.
Batteries (3)This safety message is located in the engine compartment, near the battery.
Illustration 4 g01409730
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Hot Surface (4)This safety message is located near the exhaust outlet.
Illustration 5 g03446436
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Crush Hazard (5)This safety message is located on both sides of the machine near the articulation joint.
Illustration 6 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Crush Hazard (6)This safety message is located on both sides of the machine near the articulation joint.
Illustration 7 g01371647
Connect the steering frame lock between the front and the rear frames before lifting, transporting, or servicing the machine in the articulation area. Disconnect the steering frame lock and secure the steering frame lock before resuming operation. Severe injury or death could occur.
Do Not Weld or Drill (7)This safety message is located on the post for the ROPS (Rollover Protective Structure).
Illustration 8 g01226901
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.