FENDER 2149563 - Caterpillar

Removal Procedure
Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g00817367
Remove cover (1) from the machine.
Illustration 2 g00817384
Underneath operator compartment
Lower cover (2) from the machine.
Illustration 3 g00817493
The electronic control module for the transmission is located on the opposite side of bracket (3) .
Illustration 4 g00817502
Disconnect two electrical connections (4) from electronic control module (6) .
Remove four bolts (5) from bracket (3) in order to remove electronic control module (6) .Installation Procedure
Illustration 5 g00817502
Use bolts (5) in order to attach electronic control module (6) to bracket (3).
Connect electrical connections (4) to electronic control module (6) .
Illustration 6 g00817384
Attach cover (2) to the machine.
Illustration 7 g00817367
Attach cover (1) to the machine.