FENDER & MOUNTING GP 2567521 - Caterpillar

Illustration 17 g02260655
Press the down key and highlight "SERVICE MAINTENANCE INTERVAL". Press the "OK" key. A dialog like Illustration 18 appears.
Illustration 18 g02260877
The "SERVICE MAINTENANCE INTERVAL HOURS" are displayed. Press the down key to view the "SERVICE MAINTENANCE INTERVAL DAYS". Press the "OK" key. A dialog that is like Illustration 19 appears.
Illustration 19 g02260894
Press the down key to view the "PASSWORD REQUIRED TO RESET THE SERVICE MAINTENANCE INTERVAL". The security level that is required is level 3 but, the required security level can be changed with Cat ET.Perform the following procedure to reset the timer on the display:
Illustration 20 g02260635
At the main menu, press the down key and highlight "CONFIGURE". Press the "OK" key. A dialog like Illustration 21 appears.
Illustration 21 g02260958
Press the down key and highlight "RESET COUNTERS". Press the "OK" key. A dialog like Illustration 22 appears.
Illustration 22 g02260961
Press the down key and highlight "SERV MAINT INTERVAL". Press the "OK" key. A dialog like Illustration 23 appears.
Illustration 23 g02260968
"RESET SERV INTVL" is highlighted. Press the "OK" key to reset the service interval.
Illustration 24 g02261034
A confirmation prompt will appear. Press the "OK" key to continue and reset the service maintenance interval. Press the escape key to cancel the reset operation. A screen like Illustration 25 appears.
Illustration 25 g02261073
The new service intervals will be displayed. Adjusting the Timer Settings from Cat ET
Connect a PC that has Cat ET to the EMCP 4.
Illustration 26 g02261114
Click on "Service Maintenance Interval".
Double click on "Maintenance Level 1 Cycle Interval Hours" located to the right. A dialog similar to Illustration 27 will appear.
Illustration 27 g02261115
Enter a new value. Click "OK" to accept the value or click "Cancel" to exit without saving the changes.
Double click on "Maintenance Level 1 Cycle Interval Days". A dialog similar to Illustration 28 will appear.
Illustration 28 g02261117
Enter a new value. Click "OK" to accept the value or click "Cancel" to exit without saving the changes.
Double click on "Customer Password Security Level to Reset Service Maintenance Interval" to enter a new security level. A screen like Illustration 29 appears.
Illustration 29 g02261116
Select the level of security that you desire. Click "OK" to accept the value or click "Cancel" to exit without saving the changes. Note: Change the password to level 3 after the reset to prevent accidentally resetting the timer.