2P9464 FENDER ASSEM. (L.H.) Caterpillar parts
D7F
Rating:
Alternative (cross code) number:
CA2P9464
2P-9464
2P9464
CA2P9464
2P-9464
2P9464
Weight: 386 pounds 175 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 2P9464:
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Turn OFF the fuel supply to the engine.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01054098
Remove bolts (1).
Remove bolts (2).
Disconnect tube assemblies (3) and (4). Remove fuel transfer pump (5).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Turn OFF the fuel supply to the engine.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01054098
Remove bolts (1).
Remove bolts (2).
Disconnect tube assemblies (3) and (4). Remove fuel transfer pump (5).