AVSPARE.COM
parts catalog

FENDER A R 6B1345 - Caterpillar



6B1345 FENDER A R Caterpillar parts FENDER
Rating:
21
Alternative (cross code) number:
CA6B1345
6B-1345
6B1345
Caterpillar 6B1345 FENDER A R
Weight: 0.30 pounds 0 kg.

Buy FENDER A R 6B1345 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01258703
Remove sheet (1) .
Illustration 2 g01187036
Disconnect harness assemblies (2) .
Illustration 3 g01187037
Disconnect harness assemblies (3) .
Illustration 4 g01187012
Remove bolts (5) .
Pull harness assembly (4) through the cab. Repeat for the other side.
Illustration 5 g01187038
Remove cable straps (6) and disconnect harness assembly (7) .
Illustration 6 g01187039
Remove bolts (8) and operator console (9) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 7 g01187039
Install operator console (9) and bolts (8) .
Illustration 8 g01187038
Connect harness assembly (7). Install cable straps (6) .
Illustration 9 g01187012
Pull harness assembly (4) through the cab and install bolts (5). Repeat for the other side.
Illustration 10 g01187037
Connect harness assemblies (3) .
Illustration 11 g01187036
Connect harness assemblies (2) .
Illustration 12 g01258703
Install sheet (1) .End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".


Parts fender Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.