FERRULE 2S0735 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel supply valve to the OFF position.
Illustration 1 g03686004
Disconnect harness assembly (1).
Remove fuel pressure sensor (2) from the fuel filter base.
Remove the O-ring seal (not shown) from fuel pressure sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g03686004
Install a new O-ring seal (not shown) on fuel pressure sensor (2).
Install fuel pressure sensor (2). Tighten fuel pressure sensor (2) to a torque of 10 2 N m (90 18 lb in).
Connect harness assembly (1).
Turn the fuel supply valve to the ON position.