FILLER 0054599 - Caterpillar

Removal Procedure
Illustration 1 g03729002
Disconnect the harness assembly from harness assembly (3) from temperature sensor (2).
Remove temperature sensor (2) from the assembly of the Clean Emissions Module (CEM) (1). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g03729002
Lightly lubricate the thread of temperature sensor (2) with Tooling (A). Install the temperature sensor to CEM (1). Tighten the soot antenna to a torque of 45 N m (33 lb ft).
Connect the harness assembly to harness assembly (3) from temperature sensor (2).