FILM 1077078 - Caterpillar

2. Remove three bolts (1) from the seat support. Turn the seat toward the door. 3. Remove the knob and rubber boot (2) from the control lever. Remove four screws (4) from cover (3). Remove cover (3). 4. Put identification on hose assemblies (6) for assembly purposes and disconnect hose assemblies (6) from the control panel.5. Remove four bolts holding control valve (5) to the control panel. Remove control valve (5). The following steps are for the installation of the control valve.6. Install control valve (5) in the control panel.7. Connect six hose assemblies to control valve (5).8. Install cover (3) with four screws (4). Install rubber boot (2) and the knob on the control lever.9. Put the seat in position and install three bolts (1).10. Put the floor mat in place and install the retainer and screws that hold it.