AVSPARE.COM
parts catalog

FILM GP 1400038 - Caterpillar



1400038 FILM GP Caterpillar parts 775D FILM
Rating:
52
Alternative (cross code) number:
CA1400038
140-0038
1400038
Caterpillar 1400038 FILM GP

Buy FILM GP 1400038 Caterpillar genuine, new aftermarket tractor parts with delivery
QUARRY TRUCK,

Compatible equipment models: 1400038:

QUARRY TRUCK  775D   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 1 g01155119
Typical example
Table 1
Specifications for 365-2820 Piston    
Callout     Part Number     Part Name     Specification Description    
1     329-3779     Top Piston Ring     The shape of the top compression ring...................Keystone
Ring gap is
0.30 to 0.40 mm (0.01181 to 0.01575 inch).    
2     324-7463     Piston Ring     The shape of the compression ring...................Internal bevel in the bottom edge with a tapered face
Width of piston ring is
2.47 to 2.495 mm (0.0972 to 0.0982 inch).
Clearance of piston ring and piston groove is
0.065 to 0.110 mm (0.00256 to 0.00433 inch).
Ring gap is
0.65 to 0.85 mm (0.0256 to 0.0335 inch).    
3     363-4968     Oil Control Ring     Width of oil control ring is
2.97 to 2.99 mm (0.1169 to 0.1177 inch).
Clearance of oil control ring and piston groove is
0.03 to 0.07 mm (0.0011 to 0.0027 inch).
Ring gap is
0.30 to 0.55 mm (0.0118 to 0.0216 inch).    
-     324-3529     Piston     Piston height above the cylinder block is
0.55 to 0.20 mm (0.02165 to 0.00787 inch).
Width of top groove in the piston...................Tapered
Width of second groove in new piston is
2.56 to 2.58 mm (0.1008 to 0.1016 inch).
Width of second groove in new piston is
3.02 to 3.04 mm (0.1189 to 0.1197 inch).    
-     317-6214     Pin     Diameter of a new piston pin is
39.694 to 39.700 mm (1.5628 to 1.5630 inch).    Note: When you install a new top compression ring, make sure that the word "TOP" is facing the top of the piston. New top piston rings have a black identification mark. The identification mark must be on the left of the ring end gap when the top piston ring is installed on an upright piston.Note: When you install a new intermediate compression ring, make sure that the word "TOP" is facing the top of the piston. New intermediate rings have a blue identification mark. The identification mark must be on the left of the ring end gap when the top piston ring is installed on an upright piston.Note: When you install a new oil control ring, make sure that the word "TOP" is facing the top of the piston. New oil control rings have a red identification mark. The identification mark must be on the left of the ring end gap when the top piston ring is installed on an upright piston. The oil control ring is a two-piece ring that is spring loaded. A pin is used in order to hold both ends of the spring of the oil control ring in position. The ends of the spring of the oil control ring must be installed opposite the end gap of the oil control ring.Note: Ensure that the ring end gaps of the piston rings are spaced 120 degrees from each other.Note: An arrow which is marked on the piston crown must be toward the front of the engine.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
775D Quarry Truck 8AS00001-UP (MACHINE) POWERED BY 3412E Engine


Parts film Caterpillar catalog:

3878657 FILM GP
3512, 3512B, 3516, 3516B, C175-16, C175-20
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.