FILM-WARNING 1598036 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9758     Jack Stand     2    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g01332671
Attach a suitable lifting device to stabilizer link (1). The weight of stabilizer link (1) is approximately 130 kg (285 lb).
Remove bolts (2), the cap, and the shims from stabilizer link (1). Lower stabilizer link (1) to the floor.
Illustration 2 g00896420
Attach a suitable lifting device to lift cylinder (3). The weight of lift cylinder (3) is approximately 107 kg (236 lb).
Remove bolts (4), the cap, the nuts, and the shims that hold lift cylinder (3) to the blade.
Start the machine in order to retract lift cylinder (3) .
Turn off the machine and secure lift cylinder (3) to the machine.
Illustration 3 g00896421
Remove bolts (6) and guard (5) from the cleaner bar.
Illustration 4 g00896422
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Remove clamps (7) and (9). Disconnect hose assemblies (8) .
Illustration 5 g00896423
Install Tooling (A) under each push arms (10) .
Illustration 6 g00896424
Remove bolts (12) that hold the push arms to cleaner bar (11) .
Illustration 7 g00896425
Start the machine. Carefully drive the machine away from blade assembly (13) .