FILM-CONTROL 1943748 - Caterpillar

Illustration 1 g00280104
(1) Torque for three plugs ... 157 8 N m (116 6 lb ft) (2) Torque for four bolts ... 59 5 N m (44 4 lb ft)Note: Apply 9S-3263 Thread Lock to the threads of the bolts. (3) Clearance ... .75 .45 mm (0.030 0.018 inch) Use the following plates to adjust the clearance (3) . 136-2841 Plate ... 2.3 mm (0.09 inch) 136-2842 Plate ... 2.8 mm (0.11 inch) 136-2843 Plate ... 3.2 mm (0.13 inch) (4) Torque for twelve bolts ... 73 4 N m (54 3 lb ft) (A) Tighten the nut to a torque of 1245 137 N m (918 101 lb ft). (6) The rubber toric seals and all the surfaces in contact with those seals must be clean and dry at assembly. Apply a thin film of oil to the contacting surfaces of the metal seal ring prior to assembly. The seal ring must be assembled square with the bore. The rubber toric seal must not bulge. The rubber toric seal must not be twisted. (7) Torque for two plugs ... 40 5 N m (30 4 lb ft)