FILM-IDENTIFICATION 2469209 - Caterpillar

Illustration 54 g00599815
Remove shaft (96) and bevel gear (97) as a unit from the carrier. Use a lifting strap and an appropriate lifting device. The weight of the components is approximately 646 N (145 lb).
Illustration 55 g00599819
Place shaft (96) and bevel gear (97) on blocks. Remove bolts and nuts (98) and remove gear (99) from shaft (96) .
Illustration 56 g00599823
Separate shaft (96) from bevel gear (97) by using Tooling (E) .
Illustration 57 g00599825
Remove shaft (96) from bevel gear (97) by using a lifting strap and an appropriate lifting device. The weight of shaft (96) is approximately 312 N (70 lb).
Illustration 58 g00599826
Remove tapered bearings (100) and (101) from shaft (96) .
Illustration 59 g00599829
Reposition the planetary carrier and remove bolts (102) from cage (103) .
Illustration 60 g00624187
Remove cage (103) from the planetary carrier housing by using Tooling (E) .
Remove dowels (104) from the planetary carrier housing, if necessary.
Illustration 61 g00599836
Remove bearing cup (105) and shims (106) from cage (103) .
Illustration 62 g00599837
Reposition the planetary carrier and remove bolt (108A) and the washer. Remove tubes (107) and (108) from the planetary housing.
Illustration 63 g00599841
Reposition the planetary carrier and remove bolts (109) from cage (110) .
Illustration 64 g00599843
Remove cage (110) and the shims from the planetary carrier by using Tooling (F) .
Illustration 65 g00599844
Remove shims (111) and bearing cup (112) from cage (110) .
Illustration 66 g01033272
Remove input pinion (113) from the planetary carrier by using Tooling (H) and a suitable lifting device. The weight of input pinion (113) is approximately 223 N (50 lb).
Illustration 67 g00624201
Remove tapered bearings (114) and (115) from input pinion (113) .
Illustration 68 g00599851
Remove bearing cup (116) from planetary carrier (117) .