FILM-STRETCH 2916710 - Caterpillar

Illustration 1 g01439415
Press the down arrow key or the up arrow key in order to select the correct .cfg file.
Press the "OK" key. The AccuGrade system sends the .cfg file to the system and provides status information. The following text shows on the dialog in Illustration 2.
"Loading. Please wait ..."You then return to the "Setup Menu – Configuration" dialog.You must wait a few minutes while the GPS receiver gains lock.Make sure that you check the GPS configuration file was properly sent. In order to do this, position the center of the blade on a known point and compare the coordinates that appear on the display with the known coordinates of the point.
Illustration 2 g01475475