FILM-IDENTIFICATION 3108877 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B - Guide Stud3/8 - 16 by 4 inch 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00772208
Install Tooling (A) and attach a suitable lifting device on housing (9).
Remove all gasket and foreign material from the housing.
Illustration 2 g00772045
Illustration 3 g00772213
Position core (11).
Put housing (9) and gasket (13) in position on the mounting plate. The two bolt (12) in mounting plate (10) must be installed. Install Tooling (B) in aftercooler (5).
Install bolts (1) and remove Tooling (B).
Repeat this procedure for the housing on the opposite side of the aftercooler.
Illustration 4 g00772041
Put brackets (6) and (7) in position and install bolts (8).
Illustration 5 g00772040
Clean the gasket material from aftercooler (5).
Illustration 6 g00772036
Put a new gasket and bonnet (2) in position and install clips (3) and bolts (4) and (1).
Repeat this procedure for the bonnet on the opposite side of the aftercooler. End By:
Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Install".