FILM GP 3157414 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-3034 Jack Stands 2 Start By:
Remove the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Open the side access panel.
Illustration 1 g02535396
Raise the rear of the machine and place Tooling (A) under each side of the machine.
Illustration 2 g02535439
Remove nuts (1).
Illustration 3 g02535462
Place a suitable lifting device under wheel assembly (2) and remove wheel assembly (2). The weight of wheel assembly (2) is approximately 386 kg (850 lb).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 180-3034 Jack Stands 2
Illustration 4 g02535462
Place a suitable lifting device under wheel assembly (2) and install wheel assembly (2). The weight of wheel assembly (2) is approximately 386 kg (850 lb).
Illustration 5 g02535439
Install nuts (1).
Illustration 6 g02535396
Raise the rear of the machine and remove Tooling (A) from each side of the machine.
Close the side access panel.End By:
Install the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".