AVSPARE.COM
parts catalog

FILM-WARNING 3237262 - Caterpillar



3237262 FILM-WARNING Caterpillar parts FILM
Rating:
41
Alternative (cross code) number:
CA3237262
323-7262
3237262
Caterpillar 3237262 FILM-WARNING
Weight: 0.01 pounds 0 kg.

Buy FILM-WARNING 3237262 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 13
 
  For full view, you need register

Information:


Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Reference: Refer to Video Tape, LEVN5101, "C-10 and C-12 Head Gasket Repair Procedure".
Thoroughly clean the mating surfaces of the cylinder head and the cylinder block.
Clean all 26 head bolt holes on the cylinder block with Tooling (F).
After cleaning the threads, remove any debris from the head bolt holes on the cylinder block with a vacuum hose.
Visually inspect the head bolt holes on the cylinder block for thread damage.
If a damaged head bolt thread is observed, repair the damaged head bolt thread with a Heli-Coil thread repair kit.
Inspect the cylinder head and the cylinder block for flatness. Refer to Guideline for Reusable Parts and Salvage Operations, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components".
Illustration 1 g01062281
Install the correct cylinder head gasket (19) and the new O-ring seals on the cylinder block. Inspect the condition of the remaining gaskets. Replace the gaskets, if necessary.Note: To avoid damage to the cylinder head gasket, use guide bolts of an appropriate size to install the cylinder head.
Use a suitable lifting device to install cylinder head (18) on the cylinder block.
Illustration 2 g01062278
Install the gasket on cylinder head (18).
Install cylinder head bolts (17). If the engine is equipped with a compression brake, then also install head bolt studs.
Lubricate the following components with Tooling (G): the bolt threads, the underside of the bolt heads and the washers. Follow Step 12 for the correct tightening procedure.
Illustration 3 g00517501
Tightening Sequence
Note: Engines that are equipped with a compression brake will have three head bolt studs. Install the head bolt studs in positions (2), (8), and (10). Tighten the head bolt studs in sequence with the cylinder head bolts.
Tighten the cylinder head bolts according to the following procedure:
Tighten bolt (1) through bolt (26) in a numerical sequence to a torque of 160 15 N m (120 11 lb ft).
Tighten bolt (1) through bolt (26) again in a numerical sequence to a torque of 160 15 N m (120 11 lb ft).
Place an index mark on each bolt head. Turn bolt (1) through bolt (26) in a numerical sequence for an additional 90 degrees (1/4 turn).
Loosen bolt (1) through bolt (26) until the washers are loose under the bolt heads.
Tighten bolt (1) through bolt (26) in a numerical sequence to a torque of 160 15 N m (120 11 lb ft).
Tighten bolt (1) through bolt (26) again in a numerical sequence to a torque of 160 15 N m (120 11 lb ft).
Place an index mark on each bolt head. Turn bolt (1) through bolt (26) in a numerical sequence for an additional 90 degrees (1/4 turn).
Tighten bolt (27) through bolt (33) in a numerical sequence to a torque of 28 7 N m (20 5 lb ft).
Install the head bolt spacers on the three head bolt studs. Tighten the three head bolt studs to a torque of 100 20 N m (75 15

Cat SIS web machinery list:

Caterpillar parts catalog
TH3510D Telehandler TH200001-UP (MACHINE) POWERED BY C3.4B or C4.4 Engine
TH306D Telehandler TD200001-UP (MACHINE) POWERED BY 3.6L Engine
TH514D Telehandler MWG00001-UP (MACHINE) POWERED BY C3.4B, C4.4 Engine
TH408D Telehandler TH400001-UP (MACHINE) POWERED BY C4.4 or C3.4 Engine
TH357D Telehandler TD600001-UP (MACHINE) POWERED BY C3.4 or C4.4 Engine
TH417D & TH314D Telehandler MKY00001-UP (MACHINE) POWERED BY 3.6 Engine
TH514C, TH417C, TH407C, TH414C, TH406C, TH337C, TH336C, Telehandler Transmission DJB00001-00483 (MACHINE)
TH336C Telehandler MJR00271-UP (MACHINE)
TH406C Telehandler GAT00258-UP (MACHINE)
TH337C Telehandler DJB00484-UP (MACHINE)
TH407C Telehandler JJT00172-UP (MACHINE)
TH414C Telehandler KEK00373-UP (MACHINE)
TH417C Telehandler RRJ00246-UP (MACHINE)
TH514C Telehandler KKW00177-UP (MACHINE)
TH514D Telehandler MWG00001-UP (MACHINE) POWERED BY C3.4B, C4.4 Engine
TH417C GC Telehandler NAB00001-UP (MACHINE) POWERED BY 3.6 Engine
TH414C GC Telehandler KRF00001-UP (MACHINE) POWERED BY 3.6 Engine


Parts film Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.