FILM-LIFTING CAP 3296560 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     1    Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump - Remove and Install".
Remove the gear motor (hydraulic fan). Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Remove".
Illustration 1 g01417978
Remove bolt (1) and the ground strap.
Illustration 2 g01417986
Loosen nut (2) and remove throttle cable (3) from the engine.
Illustration 3 g01417988
Remove bolt (4) and spacers (5). Lay throttle cable (3) out of the way.
Illustration 4 g01417989
Disconnect harness assemblies (6), (7), and (8) .
Illustration 5 g01417990
Loosen the clamps. Remove hoses (9) and (10) .
Illustration 6 g01417991
Loosen the clamp and remove hose (11) .
Illustration 7 g01417992
Remove bolt (12). Lay the fuel lines and the hose out of the way.
Illustration 8 g01417994
Remove nut (14), cable harness (15), and cable harness (13) .
Illustration 9 g01417995
Remove cable strap (16). Lay cable harness (13) and harness assembly (17) out of the way.
Illustration 10 g01418059
Illustration 11 g01418057
Attach Tooling (A) and a suitable lifting device to engine (18). The weight of engine (18) is approximately 635 kg (1400 lb).
Remove nut (21), the bolt, and the washers.
Remove bolts (19) and (20) .
Remove engine (18) .