FILM GP 3769596 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g01073287
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install the O-ring seal onto plug (6). Install plug (6) into body (1) .
Install valve (3) into body (1) .
Install spring (5) into body (1) .
Install the O-ring seal onto plug (4). Install plug (4) into body (1) .
Install carry-check valve (2) into body (1) .End By: Install the carry-check valve. Refer to Disassembly and Assembly, "Check Valve (Carry) - Install". The information is in this manual.