FILM-DASH 3E3110 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     180-3034     Jack Stand Gp     2    
B     1U-7505     Hydraulic Jack     1    Note: The accumulation of debris inside the bottom guards may add significantly to the weight of the bottom guards. Use extreme caution when you are removing the bottom guards.
Illustration 1 g01302152
Position Tooling (A) under blade (1) .
Illustration 2 g01302158
Position Tooling (B) under front bottom guard (2). The weight of front bottom guard (2) is approximately 74 kg (163 lb). Remove bolts (3) and the washers. Use Tooling (B) in order to lower and remove front bottom guard (2) from the machine.
Illustration 3 g01302166
Remove two bolts (4) and the washers from center bottom guards (5) and (6) .
Illustration 4 g01302170
Position Tooling (B) under center bottom guard (6). The weight of center bottom guard (6) is approximately 42 kg (92 lb).
Remove bolts (7) and the washers from center bottom guard (6). Use Tooling (B) in order to lower and remove center bottom guard (6) from the machine.
Repeat Steps 4 and 5 in order to remove center bottom guard (5) from the machine.
Illustration 5 g01302260
Remove two bolts (8) from rear bottom guard (9) .
Illustration 6 g01302279
Position Tooling (B) under rear bottom guards (9) and (11). The combined weight of rear bottom guards (9) and (11) is approximately 60 kg (132 lb).
Remove bolts (10) and the washers from rear bottom guards (9) and (11). Use Tooling (B) in order to lower and remove rear bottom guards (9) and (11) from the machine.