FILM GP 4645613 - Caterpillar

Illustration 1 g01323635
This diagnostic code is associated with the calibration of the lift valve and the tilt valve. The blade has moved outside of the upper or lower limits that have been previously set for the calibration.System Response:When this diagnostic code is active, "EXIT ERROR" will be shown on the LCD that is located on the display.Test Step 1. RECALIBRATE THE VALVE
Restart the valve calibration procedure. Refer to Systems Operation, Troubleshooting, & Testing and Adjusting, "Bank valve (Grade Control) - Calibrate".Expected Result:Recalibration causes the diagnostic code to become inactive.Results:
OK - Calibration causes the diagnostic code to become inactive.Repair: Return the machine to normal operation.STOP
NOT OK - Calibration has not caused the diagnostic code to become inactive.Repair: The calibration was not performed correctly. Perform the calibration again. Refer to Systems Operation, Troubleshooting, & Testing and Adjusting, "Bank valve (Grade Control) - Calibrate".STOP