FILM-SHIPPIN 5098446 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Track tensioners may become damaged if you do not use the proper tooling during tensioning of the tracks.Solution
Follow the procedure below: Track Adjustment
Illustration 1 g02021733
Loosen the jam nut (4). A 44 mm (1.88 inch) wrench is recommended.
Turn the adjuster (3) in order to raise or lower the drive sprocket. A 44 mm (1.88 inch) wrench is recommended.
Tighten the jam nut to the following torque 270 40 N m (199 30 lb ft) with a backup wrench on the Adjuster. Failure to use the backup wrench will result in lower torque or damage to the tensioner.
Recheck the track tension.