FILM-PATENT (TRACK TYPE TRACTOR) 5P8189 - Caterpillar

5P8189 FILM-PATENT (TRACK TYPE TRACTOR) Caterpillar parts 120H NA, D6H, D7H, D8L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5P8189
5P-8189
5P8189

Caterpillar 5P8189 FILM-PATENT (TRACK TYPE TRACTOR)

Weight: 0.05 pounds 0 kg.

Buy FILM-PATENT (TRACK TYPE TRACTOR) 5P8189 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER, TRACK-TYPE TRACTOR,

Compatible equipment models: 5P8189:

MOTOR GRADER 120H NA

TRACK-TYPE TRACTOR D6H D7H D8L Caterpillar

Number on catalog scheme: 1

Caterpillar 5P8189 Parts scheme FILM-PATENT (TRACK TYPE TRACTOR)

For full view, you need register

Information:

Illustration 1 g03432065
Typical exampleRight side view of engine (2) High-pressure turbocharger (7) Low-pressure turbocharger
Illustration 2 g01502594
Tightening sequence for flange of the turbochargerUse the following procedure to tighten the locknuts for the flange of the turbocharger:Note: Apply 4C-5599 Anti-Seize Compound to the washer face and threads of the locknuts before assembly.
Tighten locknut 1 through locknut 4 in a numerical sequence to 55 5 N m (41 4 lb ft). Refer to 2.
Again, tighten locknut 1 through locknut 4 in a numerical sequence to 55 5 N m (41 4 lb ft). (1) Opening pressure of the wastegate at 1.00 mm (0.039 inch) lift ... 196.4 kPa (28 psi) (3) Torque for the bolt ... 6 1 N m (55 9 lb in) (4) Torque for the elbow ... 12.0 1.5 N m (105 13 lb in)Use the following procedure to tighten the clamp assembly (5) :
Tighten the clamp assembly to 18 N m (160 lb in).
Loosen the clamp assembly to 6 N m (55 lb in).
Again, tighten the clamp assembly to 13.5 1.0 N m (120 9 lb in). (6) Torque for the compressor clamp assembly ... 13.6 1.2 N m (120 11 lb in)