5P9664 FILM--PARKING BRAKE Caterpillar parts
571G, D5B, D6D, D7G
Rating:
Alternative (cross code) number:
CA5P9664
5P-9664
5P9664
CA5P9664
5P-9664
5P9664
Weight: 0.01 pounds 0 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Information:
CONFIDENTIAL TIBU3790-00
TECHNICAL INFORMATION BULLETIN February 12, 2003
PRODUCT FAMILY(S) SALES MODEL (2KS)
Component Code(s) 1205 1405 1425SUBJECT: Low idle engine speeds affecting alternator charging performance
PROBLEM:
Alternator speeds may be to low too charge the batteries of the vehicle when the engine low idle is set to 600 rpm.
SOLUTION:
When investigation the charging performance of an alternator consider the engine idle speed during operation. Programming the engine low idle speed on EUI engines is very flexible, and this may cause the alternator to be rotating below its normal operating range. The operating range for the Caterpillar 9X-7803 alternator is 2300 rpm to 8000 rpm. To obtain a desirable low idle speed for the alternator the engine idle should be set to 700 rom. If there is a change in the crankshaft pulley diameter, a change should also be made to the alternator to keep the alternator within its desired operating range. The following chart is a selection of alternator pulley arrangements, and crankshaft pulleys to obtain the desired alternator rotation speed.
Alternator and crankshaft pulley arrangements
Alternator Pulley Crankshaft Pulley Alternator drive ratio
117-0177
68.5mm (2.69in) diameter with 8 groove for K rib belt. 116-5444
228.5mm (9in) diameter with 8 groove for K rib belt. 3.34 x engine speed
123-0789
57mm (2.24in) diameter with 8 groove for K rib belt. 117-2795
190.5 mm (7.5in) diameter with 8 groove for K rib belt. 3.34 x engine speed
138-2516
82mm (3.23in) diameter with 8 groove for K rib belt. 116-5444
228.5mm (9in) diameter with 8 groove for K rib belt. 2.8 x engine speedThe Caterpillar 9X-7803 alternator output at 2300 rpm will be 1/3 of rated output, and if the vehicle?s electrical power requirements are above this, battery life will be limited.
In some instances the alternator is driven from the fan pulley rather than the engine crankshaft pulley, in these cases the fan speed ratio to crankshaft is needed to calculated the alternator?s speed.
COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED
TECHNICAL INFORMATION BULLETIN February 12, 2003
PRODUCT FAMILY(S) SALES MODEL (2KS)
Component Code(s) 1205 1405 1425SUBJECT: Low idle engine speeds affecting alternator charging performance
PROBLEM:
Alternator speeds may be to low too charge the batteries of the vehicle when the engine low idle is set to 600 rpm.
SOLUTION:
When investigation the charging performance of an alternator consider the engine idle speed during operation. Programming the engine low idle speed on EUI engines is very flexible, and this may cause the alternator to be rotating below its normal operating range. The operating range for the Caterpillar 9X-7803 alternator is 2300 rpm to 8000 rpm. To obtain a desirable low idle speed for the alternator the engine idle should be set to 700 rom. If there is a change in the crankshaft pulley diameter, a change should also be made to the alternator to keep the alternator within its desired operating range. The following chart is a selection of alternator pulley arrangements, and crankshaft pulleys to obtain the desired alternator rotation speed.
Alternator and crankshaft pulley arrangements
Alternator Pulley Crankshaft Pulley Alternator drive ratio
117-0177
68.5mm (2.69in) diameter with 8 groove for K rib belt. 116-5444
228.5mm (9in) diameter with 8 groove for K rib belt. 3.34 x engine speed
123-0789
57mm (2.24in) diameter with 8 groove for K rib belt. 117-2795
190.5 mm (7.5in) diameter with 8 groove for K rib belt. 3.34 x engine speed
138-2516
82mm (3.23in) diameter with 8 groove for K rib belt. 116-5444
228.5mm (9in) diameter with 8 groove for K rib belt. 2.8 x engine speedThe Caterpillar 9X-7803 alternator output at 2300 rpm will be 1/3 of rated output, and if the vehicle?s electrical power requirements are above this, battery life will be limited.
In some instances the alternator is driven from the fan pulley rather than the engine crankshaft pulley, in these cases the fan speed ratio to crankshaft is needed to calculated the alternator?s speed.
COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED
Caterpillar parts catalog:
Parts film Caterpillar catalog:
5P8517
FILM--CAUTION
D5B, D6D
D5B, D6D
5P6381
FILM--D5B
D5B
D5B
5P7137
FILM--TO DUCT ASSEMBLY
943, 953B, 953C, 963, 963B, 963C, 973, 973C, D4E, D5B, D6D, D7G, D9H
943, 953B, 953C, 963, 963B, 963C, 973, 973C, D4E, D5B, D6D, D7G, D9H
5P9673
FILM-PARKING BRAKE
571G, 572G, 583K, 594H, D4E, D4E SR, D5B, D6D, D6D SR, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H, D7G, D7H, D8K
571G, 572G, 583K, 594H, D4E, D4E SR, D5B, D6D, D6D SR, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H, D7G, D7H, D8K
5P6382
FILM-D6D
D6D
D6D
8S5490
FILM D6C
D6C
D6C
8A3010
FILM- D6D
D6D
D6D
9S0140
FILM-SPECIAL APPLICATION
D4D, D4E, D5, D5B, D6C, D6D, D7G
D4D, D4E, D5, D5B, D6C, D6D, D7G
5P6480
FILM-D4E
D4E
D4E
0372587
FILM--PARKING BRAKE
D4E, D5B, D6D
D4E, D5B, D6D