FILM-CAT-APPLY 1E2120B BONDING 8C3329 - Caterpillar

Illustration 1 g00956476
Table 1
OPERATION    
Warning Level    Alarm    "Check Monitor" Indicator    
Level 1     OFF     ON    
Level 2     OFF     Flashing    
Level 2-Special     ON     Flashing    
Level 3     Pulsating     Flashing    Note: The warning indicator has two colors. The colors of the indicator are amber and red. The indicator will flash red for usual warning levels. If the CAN data link is lost to the instrument cluster (IC), the amber indicator will flash.The monitoring system has the following four warning levels for events:Level 0 - This warning level is used in order to acknowledge actions of the operator.Level 1 - This warning level is used in order to indicate that the machine needs attention soon. No harm to the machine has occurred at this point.Level 2 - This warning level is used to indicate that the operation of the machine should be changed. Possible severe damage to components on the machine may occur.Level 2-Special - This warning level is used to indicate that the operation of the machine should be changed as soon as possible. Possible severe damage to components on the machine may occur.Level 3 - This warning level is used in order to indicate that the machine needs to have a safe emergency engine shutdown. Possible injury to the operator or severe damage to components may occur.Table 1 indicates the status of the alarm and "Check Monitor" indicator for each warning level. If the monitoring system detects an abnormal operating condition, the operator will be notified.