FILM-STRIPE (CATERPILLAR) 9X1744 - Caterpillar

Illustration 1 g00448819
(1) Magnetic switch (2) Tighten the terminal nut to the following torque. ... 6.0 0.5 N m (53 4 lb in) (3) Air inlet elbowNote: During assembly of the air inlet heater to the inlet manifold and the air inlet elbow, clean the air inlet heater's joint faces with solvent. Apply 169-5464 Quick Cure Primer to the joint faces. Allow the primer to dry for a minimum of three to five minutes. Apply 1U-8846 Liquid Gasket to the joint face and spread the gasket maker uniformly. The heater must be assembled and tightened within ten minutes. (4) Tighten the nuts to the following torque. ... 7.8 1.0 N m (69 9 lb in) (5) Air inlet heater (6) Tighten the nut for the ground strap to the following torque. ... 28 7 N m (21 5 lb ft)