FILM-TRANSMISSION & PARK 9X2269 - Caterpillar

Illustration 1 g03343016
Table 1
Specification for 5N-3765 Flexible Coupling Gp
Item Qty Part Specification Description
Use the following procedure to install the flexible coupling:
Before you install the outer coupling (1) the flywheel (6) must be clean and free from oil, paint, dirt, and protective coating.
- - - 1. Lubricate the surfaces that will contact either the O-ring seals (2) or the rubber coupling boots (5) with 5N-5561 Silicone Lubricant except the plate (4).
2. Install the O-ring seals (2) in the outer coupling (1).
3. Center the drive coupling (3) inside the outer coupling (1).
4. Place the rubber coupling boots (5) between the drive coupling (3) and outer coupling (1).
5. Fill the cavities between the couplings and the rubber coupling boots (5) with the 5N-5561 Silicone Lubricant.Bolt the plate to the coupling.
6. Bolt the outer coupling (1) into the flywheel (6).
7. Bolt the drive coupling (3) to the shaft (7).
8. As needed, modify the assembly procedure for the installation of the flexible coupling in the field.