FILTER-OIL 0971489 - Caterpillar

Machine Configuration
Cat Electronic Technician (Cat ET) is used to access the configuration screen. A message on Cat ET will give instructions to guide the user through the procedure. See Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program" for more information about required tools.Note: Electronic control module (ECM) configuration is required when:
An ECM has been replaced
Before a calibration can be startedA check of the configuration screen could help resolve a machine component problem. A component problem could be identified as one of the following items:
The component is not installed.
The component is installed but a change to the installation is needed to correct a problem.Follow these instructions to get to the configuration screen:
Connect the communications adapter and the computer to the diagnostic service tool connector.
Start Cat ET.
Select "File".
Go to "Select ECM".
Choose the desired ECM.
Go to the "Service" menu.
Select "Configuration".
Click "OK".Certain operations or characteristics can be changed for attachments or preferences.For more information on the VIMS Configuration, refer to Special Instruction, REHS7428.