FILTER AS-COOLANT CONDITIONER 1260112 - Caterpillar

1260112 FILTER AS-COOLANT CONDITIONER Caterpillar parts 3126B, 3126E, C-10, C-12, C-15, C-9, C11, C13, C15, C18, C27, C32, C7, CX31-C13I, CX31-C15I, CX35-P800, TH35-C11I, TH35-C13I, TH35-C15I, TH48-E70

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1260112
126-0112
1260112

Caterpillar 1260112 FILTER AS-COOLANT CONDITIONER

Buy FILTER AS-COOLANT CONDITIONER 1260112 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE, TRUCK ENGINE,

Compatible equipment models: 1260112:

INDUSTRIAL ENGINE C-15 C11 C13 C15 C18 C27 C32

PETROLEUM ENGINE C11 C13 C15 C18 C27 C32

PETROLEUM PACKAGE CX31-C13I CX31-C15I CX35-P800 TH35-C11I TH35-C13I TH35-C15I

PETROLEUM TRANSMISSION TH48-E70

TRUCK ENGINE 3126B 3126E C-10 C-12 C-9 C11 C13 C15 C7 Caterpillar

Number on catalog scheme:

Caterpillar 1260112 Parts scheme FILTER AS-COOLANT CONDITIONER

For full view, you need register

Information:

Personal injury or death can occur from a counterweight falling during removal or installation.Do not allow personnel under or around the counterweight during removal or installation.Make sure that the lifting device is in good condition and is capable of handling the weight of the counterweight.
Prepare Machine for Service
Park on a level surface. Set the parking brake. Chock the wheels. Refer to the following publications:
Operations and Maintenance Manual
Disassembly and AssemblyRequired Parts
Table 1
435-3412 Counterweight Gp
Qty Part Number
1 393-0079 Counterweight
2 449-2172 Film
8 130-0099 Bolts
2 7X-2561 Bolts
2 8T-4123 Washers
8 9X-8258 Washers Removal Procedure
Table 2
Required Tools
Tool Qty Part Number
A 1 138-7574 Link Bracket
B 1 1U-9199 Lever Puller Hoist Gp
Illustration 1 g03688666
Illustration 2 g02727038
Remove tail light assembles (1). Disconnect harness assembly (2) and remove tail light assembly (1) from the counterweight.Note: Retain the mounting hardware for tail light assembly (1) for reuse.
Illustration 3 g02727040
Install tooling (A), tooling (B), and a suitable lifting device to counterweight (3). The weight of counterweight (3) is approximately 544 kg (1200 lb).Note: The actual weight of the counterweight may vary due to specific machine configuration.
Remove bolts (4) and lower counterweight (3) to the ground.
Repeat Steps 1 through 3 for the left-hand side.
Remove and retain the 162-7120 Pin (C) and 115-5669 Pin (D).Installation Procedure
Illustration 4 g03688988
(5) 393-0079 Counterweight
(6) 7X-2561 Bolts
(7) 8T-4123 Washers
(8) 130-0099 Bolts
(9) 9X-8258 Washers
Remove bolts (6) and washers (7).
Attach a suitable lifting device to lift counterweight (5) using the mounting holes where bolts (6) were removed.Note: The counterweight weighs approximately 2400 kg (5300 lb).
Install counterweight (5), attach the counterweight using bolts (8) and washers (9).
Tighten bolts (8) to 1600 200 N m (1180 150 lb ft).
Install the previously removed 162-7120 Pin (C) and 115-5669 Pin (D).
Remove the lifting device.
Install bolts (6) and washers (7), tighten bolts (6) to 25 5 N m (18 4 lb ft).
Illustration 5 g02727038
Connect harness assembly (2) to tail light assembly (1).
Install tail light assembly (1). Attach tail light assembly (1) with the previously removed hardware.
Illustration 6 g03689061
(10) 449-2172 Film
Install film (10) on both sides of the hood.