1421404 FILTER ELEMENT AS-AIR Caterpillar parts
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 3306B, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L...
Rating:
Alternative (cross code) number:
CA1421404
142-1404
1421404
CA1421404
142-1404
1421404
Weight: 1 pounds 0 kg.
ARTICULATED TRUCK, WHEELED EXCAVATOR,
Cross Reference:
CATERPILLAR
1421404,
You can buy:
US$21.00
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Air Filter 1421404 Fits for kobelco SK450-6 SK480-6
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for kobelco SK450-6 SK480-6 || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for kobelco SK450-6 SK480-6 || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
Air Filter 1421404 Fits for Caterpillar CAT 330C CX330 CX360 E330D E336D
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for Caterpillar CAT 330C CX330 CX360 E330D E336D || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for Caterpillar CAT 330C CX330 CX360 E330D E336D || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
Air Filter 1421404 Fits for Sumitomo SH300 SH300-3 SH330-3 SH350-5 SH350-3
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for Sumitomo SH300 SH300-3 SH330-3 SH350-5 SH350-3 || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
EXKATCC Product Name:Air Filter || Replace Number:1421404 || Applicable:Fits for Sumitomo SH300 SH300-3 SH330-3 SH350-5 SH350-3 || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
This part in 9 request:
Show.
This information for suppliers only!
2024-09-10
2024-02-23
2023-11-14
2023-05-03
2023-05-02
2023-03-28
2020-05-29
2020-05-22
2019-04-17
Compatible equipment models: 1421404:
EJECTOR TRUCK
EXCAVATOR
330C
330C FM
330C L
330C MH
330D
330D FM
330D L
330D LN
330D MH
336D
336D L
336D LN
336D2
336D2 L
336E
336E H
336E L
336E LH
336E LN
336F L
340D L
340D2 L
568 FM LL
FORWARDER
584
PETROLEUM GEN SET
C27
Information:
Manual Operation
The power module can be used as a stand-alone unit to power an isolated load. Manual operation refers to manually closing the circuit breaker switch for the generator. The following information describes the steps for manual operation in the single unit mode.
Ensure that all load cable connections have been correctly made.
Verify that the unit can be safely started.
Verify that power can be applied to the load.Pre-startup Procedures
The pre-startup procedures are to be performed by qualified personnel. Perform the following steps before the unit is started.
(Optional) Turn the GPC and the UMR paralleling controls off.Note: If the paralleling controls are turned off, the operator can adjust the frequency manually. The power module operates like a standard generator set if the paralleling controls are turned off.
Install the "lead unit jumper". The lead unit jumper is connected between terminals 1UP-93 and 1UP-94 in the customer connection box. The jumper is required in order to allow the generator breaker to close in the single unit mode manual operation mode.
If the Cat DVR settings are unknown, then use the Caterpillar service tool to verify the configuration of the Cat DVR. The "load compensation mode" parameter is normally set to OFF.Startup Procedures
Press the "RUN" button that is on the EMCP 3 control.Note: The engine will begin to start immediately.
Use the EMCP 3 display to observe the generator voltage and the frequency once the engine is running at the rated speed.
Use the operator controls to adjust the voltage and/or the frequency if necessary.
Use the circuit breaker switch to close the generator breaker at the appropriate time. Rotate the handle clockwise until the breaker closes, then release the handle. After the handle is released, the generator unit will be providing power for 100 percent of the load.Shutdown Procedure
Press "STOP" button that is on the EMCP 3.Note: The generator breaker will open immediately. The engine will continue to run in cool down mode until the cool down time has elapsed. The engine will shut down after the cool down time has elapsed.Automatic Operation
The power module can be used as a stand-alone unit to power an isolated load. Automatic operation refers to the use of the on-board control system to close the generator breaker automatically. The following information describes the steps for automatic operation in single unit mode.
Ensure that all load cable connections have been correctly made.
Verify that the unit can be safely started.
Verify that power can be applied to the load.Pre-startup Procedures
The pre-startup procedures are to be performed by qualified personnel. Perform the following steps before the unit is started.
(Optional) Turn the GPC and the UMR paralleling controls off.Note: If the paralleling controls are turned off, the operator can adjust frequency manually. The power module operates like a standard generator set if the paralleling controls are turned off.
Install the "lead unit jumper". The lead unit jumper is connected between terminals 1UP-93 and 1UP-94 in the customer connection box. The jumper is required in order to allow the generator breaker to close in the single unit mode
The power module can be used as a stand-alone unit to power an isolated load. Manual operation refers to manually closing the circuit breaker switch for the generator. The following information describes the steps for manual operation in the single unit mode.
Ensure that all load cable connections have been correctly made.
Verify that the unit can be safely started.
Verify that power can be applied to the load.Pre-startup Procedures
The pre-startup procedures are to be performed by qualified personnel. Perform the following steps before the unit is started.
(Optional) Turn the GPC and the UMR paralleling controls off.Note: If the paralleling controls are turned off, the operator can adjust the frequency manually. The power module operates like a standard generator set if the paralleling controls are turned off.
Install the "lead unit jumper". The lead unit jumper is connected between terminals 1UP-93 and 1UP-94 in the customer connection box. The jumper is required in order to allow the generator breaker to close in the single unit mode manual operation mode.
If the Cat DVR settings are unknown, then use the Caterpillar service tool to verify the configuration of the Cat DVR. The "load compensation mode" parameter is normally set to OFF.Startup Procedures
Press the "RUN" button that is on the EMCP 3 control.Note: The engine will begin to start immediately.
Use the EMCP 3 display to observe the generator voltage and the frequency once the engine is running at the rated speed.
Use the operator controls to adjust the voltage and/or the frequency if necessary.
Use the circuit breaker switch to close the generator breaker at the appropriate time. Rotate the handle clockwise until the breaker closes, then release the handle. After the handle is released, the generator unit will be providing power for 100 percent of the load.Shutdown Procedure
Press "STOP" button that is on the EMCP 3.Note: The generator breaker will open immediately. The engine will continue to run in cool down mode until the cool down time has elapsed. The engine will shut down after the cool down time has elapsed.Automatic Operation
The power module can be used as a stand-alone unit to power an isolated load. Automatic operation refers to the use of the on-board control system to close the generator breaker automatically. The following information describes the steps for automatic operation in single unit mode.
Ensure that all load cable connections have been correctly made.
Verify that the unit can be safely started.
Verify that power can be applied to the load.Pre-startup Procedures
The pre-startup procedures are to be performed by qualified personnel. Perform the following steps before the unit is started.
(Optional) Turn the GPC and the UMR paralleling controls off.Note: If the paralleling controls are turned off, the operator can adjust frequency manually. The power module operates like a standard generator set if the paralleling controls are turned off.
Install the "lead unit jumper". The lead unit jumper is connected between terminals 1UP-93 and 1UP-94 in the customer connection box. The jumper is required in order to allow the generator breaker to close in the single unit mode
Cat SIS web machinery list:
Parts filter Caterpillar catalog:
1193355
FILTER ELEMENT-CAB AIR
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B, 980G II, 980H, D250E, D250E II, D300E, D300E II, RM-300, RM-500
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B, 980G II, 980H, D250E, D250E II, D300E, D300E II, RM-300, RM-500
1748145
FILTER ELEMENT-CAB AIR
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 980G II
621G, 623G, 627G, 631G, 637G, 725, 730, 735, 740, 980G II
2593222
FILTER ELEMENT-AIR
613G, 621G, 623G, 627G, 631G, 637G, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 980G II, 980H
613G, 621G, 623G, 627G, 631G, 637G, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 980G II, 980H
2686704
FILTER ELEMENT-CAB AIR
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, RM-300, RM-500
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, RM-300, RM-500
1432849
FILTER ELEMENT AS-OIL
320B, 320C, 322B LN, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 324E LN, 325B L, 325C, 325D, 325D L, 329D L, 329D LN, 329E, 329E L, 329E LN, 330B L, 330C, 330C L, 330D L, 330D LN, 330D MH, 336D L, ...
320B, 320C, 322B LN, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 324E LN, 325B L, 325C, 325D, 325D L, 329D L, 329D LN, 329E, 329E L, 329E LN, 330B L, 330C, 330C L, 330D L, 330D LN, 330D MH, 336D L, ...
1303212
FILTER-OIL
69D, 725C, 730C, 735B, 740B, 769D, 771D, 773D, 773E, 775D, 775E, AD30, AD45B, AD55, AD55B, AD60, D11T, RM-350B, SM-350
69D, 725C, 730C, 735B, 740B, 769D, 771D, 773D, 773E, 775D, 775E, AD30, AD45B, AD55, AD55B, AD60, D11T, RM-350B, SM-350
2338359
FILTER ELEMENT-CAB AIR
725, 730, 735, 740, RM-300, RM-500
725, 730, 735, 740, RM-300, RM-500
2200453
FILTER ELEMENT AS-AIR
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL, 725C, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL, 725C, M330D
1752838
FILTER ELEMENT-CAB AIR
320C FM, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 521B, 522B, 541 2, 552 2, 568 FM LL
320C FM, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 521B, 522B, 541 2, 552 2, 568 FM LL
1R0792
FILTER ELEMENT AS-OIL
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2, TK711, TK721, TK722, TK732, TK741, TK751, TK752
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2, TK711, TK721, TK722, TK732, TK741, TK751, TK752
1966581
FILTER ELEMENT-OIL
324D, 324D L, 324E, 325D L, 329D, 329D L, 329E, 330D L, 336D, 336E
324D, 324D L, 324E, 325D L, 329D, 329D L, 329E, 330D L, 336D, 336E
2897789
FILTER ELEMENT AS-OIL
324D, 324D L, 324E, 325D L, 328D LCR, 329D, 329D L, 329E, 330D L, 336D, 336D2, 336E
324D, 324D L, 324E, 325D L, 328D LCR, 329D, 329D L, 329E, 330D L, 336D, 336D2, 336E
1421339
FILTER ELEMENT AS-AIR
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 3306B, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 3306B, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L...
2876052
FILTER-FUEL
C4.4
C4.4
1232368
FILTER ELEMENT-AIR
3054, 3054B, 3054C, C4.4
3054, 3054B, 3054C, C4.4
2752276
FILTER ELEMENT-BREATHER
3508C, 3512C, 3516C, C175-16, C18, C32, C9
3508C, 3512C, 3516C, C175-16, C18, C32, C9
4P7384
FILTER ELEMENT-FUEL
3406C, 3412, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 777D, PM3412, PM3508, PM3512, PM3516
3406C, 3412, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 777D, PM3412, PM3508, PM3512, PM3516
3084775
FILTER GP-FUEL
3608, C280-16
3608, C280-16
3186545
FILTER ELEMENT-ENGINE OIL
3612, 3616, C280-12, C280-16
3612, 3616, C280-12, C280-16
1327167
FILTER ELEMENT AS-AIR
3126B, 3412, 3412C, C-9, C27, C9, C9.3, CX31-C9I, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, TH31-E61
3126B, 3412, 3412C, C-9, C27, C9, C9.3, CX31-C9I, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, TH31-E61