FILTER GP-FUEL 1578384 - Caterpillar

Illustration 1 g01040733
Speed select switch
Illustration 2 g00766168
Creeper control leverSelect the speed range with the switch for the creeper control.When the creeper speed control is moved into the slow speed mode, some of the hystat pump oil for speed sensing is drained to the hydraulic tank. This destrokes the pump and this upstrokes the small variable displacement motor, while machine speed is decreased and full engine rpm is maintained.In the fast mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 35 km/h (0 to 21.5 mph) for the wheel loader. The ground speed can be varied between 0 to 32 km/h (0 to 19.8 mph) for the integrated toolcarrier.In the slow mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 9 km/h (0 to 5.6 mph).Move the lever forward into the detent position for the fast mode. This provides the maximum speed setting. Move the lever backward to the point that is just out of the detent. This will put the machine in the maximum slow speed.