FILTER GP-AIR 1607163 - Caterpillar

(1) Torque for connector ... 28 4 N m (21 3 lb ft) (2) Torque ... 45 5 N m (33 4 lb ft) (3) Maximum misalignment ... 1° (4) Torque for spacer ... 45 5 N m (33 4 lb ft) (5) Torque for swivel assembly ... 45 5 N m (33 4 lb ft) (6) Do not apply more than 50 N m (37 lb ft) of torque to pilot lines. (7) Torque for plugs ... 12 3 N m (105 27 lb in) (8) Apply 1P-0808 Multipurpose Grease to the moving surfaces. (9) When you install the handle, hold the spacer in order to keep the spacer from rotating. (10) Apply 9S-3263 Thread Lock Compound to the threads prior to installation. (11) 163-3108 Pilot Cartridge Valve for the rack back detent (12) 163-3109 Pilot Cartridge Valve for the float detent (13) 194-5033 Pilot Cartridge Valve for the dump (14) 163-3107 Pilot Cartridge Valve for the raise detent 163-3108 Pilot Cartridge Valve
Illustration 2 g01038707
(1) Torque for cage ... 15 2 N m (130 17 lb in) (2) Torque for orifice ... 2 0.5 N m (17 4 lb in) (3) Torque for stop ... 6 1 N m (55 9 lb in) (4) Lubricate the seals with the lubricant that is being sealed. (5) 153-8926