FILTER-FUEL 1986378 - Caterpillar

Warning Signs and Labels
There may be several specific safety signs on your engine. Please take the time to familiarize yourself with these safety signs.Make sure that you can read all safety signs. Clean or replace these if you cannot read the words or see the pictures. When cleaning the labels use a cloth, water and soap. Do not use solvents, gasoline, etc., to clean safety signs. The use of solvents, gasoline, etc., could loosen the sign's adhesive and cause the sign to fall off.You must replace a label if it is damaged, missing or cannot be read. If a label is on a part that is replaced, make sure a new label is installed on the replaced part. See your GMC TopKick/Chevrolet Kodiak dealer, who is an authorized Cat 3116 engine dealer for new labels.General Hazard Information
Attach a "DO NOT OPERATE" or similar warning tag to start switch or controls before servicing or repairing the truck engine. These tags, Form SEHS7332, are available from your GMC TopKick/Chevrolet Kodiak dealer, who is an authorized Cat 3116 engine dealer.Unless Instructed Differently, Perform All Maintenance as Follows: * Stop the engine.* Apply the secondary or parking brakes.* Ensure the protective locks or controls are in the applied position.* Block or restrain the vehicle before servicing.* Wear a hard hat, protective glasses and other protective equipment as required by job conditions.Do not wear loose clothing or jewelry that can catch on controls or other parts of the engine.Make certain all protective guards and covers are secured in place on the truck.Disconnect the batteries, before servicing the electrical system.Do not allow unauthorized personnel in the truck when it is being serviced.Use proper tools and replace or repair broken or damaged equipment.Do not attempt repairs you do not understand.Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well-ventilated area and, if in an enclosed area, vent the exhaust to the outside.Remove all tools, electrical cords and other loose items from the engine before starting.When starting an engine after repairs have been made to the fuel system, make provisions for shutting off the engine's intake air supply, to stop the engine, in case there is an overspeed on start-up.Start the engine only from the cab. Never short across the starter terminals or the batteries as this could bypass the engine neutral-start system as well as damage the electrical system.If the engine is not running, do not release the secondary or parking brake systems unless the truck is blocked or restrained.Pressure air can cause personal injury. When using pressure air for cleaning, wear a protective face shield and protective clothing.Never put maintenance fluids into glass containers since glass containers can break.Asbestos Information
Caution should be used to avoid breathing dust that may be generated when handling components containing asbestos fibers. If this dust is inhaled, it can be hazardous to your health. Normal handling is not hazardous as long as airborne dust which contains