1C3860 FILTER-OIL Caterpillar parts
PR-1000, PR-750B
Rating:
Alternative (cross code) number:
CA1C3860
1C-3860
1C3860
CA1C3860
1C-3860
1C3860
Weight: 3 pounds 1 kg.
COLD PLANER,
Number on catalog scheme:
66
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 370-8376 Cap Kit 1
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02237533
Make a temporary identification mark on plastic tube assembly and hose assembly in order to show the correct position of the tube assemblies.
Slide hose clamp (2) along hose assembly (1). Disconnect hose assembly (1) from the assembly of fuel priming pump (7).
Use Tooling (A) in order to plug the hose assembly with new plug. Use Tooling (A) in order to cap all open connectors on the fuel priming pump with new caps.
Disconnect plastic tube assembly (6) from the assembly of fuel priming pump (7). Use Tooling (A) in order to plug the tube assemblies with new plugs. Use Tooling (A) in order to cap all open connectors on the fuel priming pump with new caps.
Disconnect the harness assembly from fuel priming pump connection (8).
Remove bolts (3) and bolt (4).
Remove the assembly of priming pump (7) from bracket (5).
Illustration 2 g02237534
If necessary, follow Step 10.a through Step 10.d in order to disassemble the assembly of the fuel priming pump (7).
Remove allen head screws (11) from fuel priming pump (7).
Remove fuel priming pump (7) from manifold (10).
Remove O-ring seal (12) (not shown).
If necessary, remove connection (13) from manifold (10). Remove O-ring seal (14) (not shown) from connection (13). Installation Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that the fuel priming pump is clean and free from wear and damage. If necessary, replace the fuel priming pump.
Illustration 3 g02237534
If necessary, follow Step 2.a through Step 2.c in order to assemble fuel priming pump (7).
If necessary, install a
Table 1
Required Tools
Tool Part Number Part Description Qty
A 370-8376 Cap Kit 1
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02237533
Make a temporary identification mark on plastic tube assembly and hose assembly in order to show the correct position of the tube assemblies.
Slide hose clamp (2) along hose assembly (1). Disconnect hose assembly (1) from the assembly of fuel priming pump (7).
Use Tooling (A) in order to plug the hose assembly with new plug. Use Tooling (A) in order to cap all open connectors on the fuel priming pump with new caps.
Disconnect plastic tube assembly (6) from the assembly of fuel priming pump (7). Use Tooling (A) in order to plug the tube assemblies with new plugs. Use Tooling (A) in order to cap all open connectors on the fuel priming pump with new caps.
Disconnect the harness assembly from fuel priming pump connection (8).
Remove bolts (3) and bolt (4).
Remove the assembly of priming pump (7) from bracket (5).
Illustration 2 g02237534
If necessary, follow Step 10.a through Step 10.d in order to disassemble the assembly of the fuel priming pump (7).
Remove allen head screws (11) from fuel priming pump (7).
Remove fuel priming pump (7) from manifold (10).
Remove O-ring seal (12) (not shown).
If necessary, remove connection (13) from manifold (10). Remove O-ring seal (14) (not shown) from connection (13). Installation Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that the fuel priming pump is clean and free from wear and damage. If necessary, replace the fuel priming pump.
Illustration 3 g02237534
If necessary, follow Step 2.a through Step 2.c in order to assemble fuel priming pump (7).
If necessary, install a
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
16, 1674, 1676, 1693, 3176, 3176B, 3176C, 3196, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 583H, 621, 623, 627, 637, 637B, 641, 641B, 650B, 651, 651E, 657, 657B, 657E, 666, 666...
12H, 140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 345B, 345B II, 345B II...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215C, 235, 235B, 235C, 235D, 330, 330 L, 3304, 3304B, 3306, 3...
305.5, 306, 307C, 307D, 308C, 308D, 3114, 3116, 3204, 3208, 446B, 446D, 918F, 924F, 926, 943, CB-434, D4HTSK II, IT12B, IT24F, PR-1000
12K, 12M, 140K, 140K 2, 140M, 160K, 160M, 16G, 16H NA, 235B, 24H, 2864C, 3126B, 3176, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406, 3406...
16, 3126E, 3176, 3176B, 3176C, 3196, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 651E, 657E...
16G, 245, 3116, 3126B, 3126E, 3176C, 3196, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 578, 589, 75C, 769C, 824G, 825G, 826C, 826G, 85C, 980C, 980F, 98...
120H, 12H, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16G, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590...
16H NA, 24H, 3116, 3126, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3516, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH, 5110B, 589, 631D, 631E, 631G,...
16G, 245, 3116, 3126B, 3126E, 3176C, 3196, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508B, 3512, 3512B, 3512C, 3516C, 578, 589, 621, 621B, 769C, 824C, 983B, 992C, C-10...
AP-1050, AP-1200, AP-800, PR-750B
AP-1000, AP-1200, AP-800, PR-750B, RR-250, SS-250
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
1G5377
FILTER GP-OIL
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
7R8237
FILTER-OIL
PR-1000
PR-1000
AP-1050
1188013
FILTER GP-OIL
AP-1000, AP-1050, AP-800
AP-1000, AP-1050, AP-800
AP-1050, AP-1200, AP-800, PR-750B
AP-200B, CB-214B, CB-224C
AP-200B, CB-214B, CB-224C
1G7202
FILTER-FUEL
AP-200B
AP-200B
AP-200B, CB-224C
AP-1000, AP-1200, AP-800, PR-750B, RR-250, SS-250
7R6525
FILTER-COMPRESSED AIR
PM-565, PR-1000, PR-450C
PM-565, PR-1000, PR-450C