1G5377 FILTER GP-OIL Caterpillar parts
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
Rating:
Alternative (cross code) number:
CA1G5377
1G-5377
1G5377
CA1G5377
1G-5377
1G5377
Weight: 4 pounds 2 kg.
COLD PLANER, STABILIZER MIXER,
Compatible equipment models: 1G5377:
Caterpillar parts catalog:
Information:
Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Guide Stud
M14 x1.5 by 100 mm     1    
B     227-4393     E18 Torx Socket     1    
C     8T-3052     Degree Wheel     1    
D     -     Guide Stud
M12 x1.75 by 50 mm     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Guide Stud
M14 x1.5 by 100 mm     1    
B     227-4393     E18 Torx Socket     1    
C     8T-3052     Degree Wheel     1    
D     -     Guide Stud
M12 x1.75 by 50 mm     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Parts filter Caterpillar catalog:
1446691
FILTER-OIL
515, 518C, 525, 525D, 528B, 530B, 535D, 545D, 725, 730, 735, 740, 924K, 930K, 938K, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245...
515, 518C, 525, 525D, 528B, 530B, 535D, 545D, 725, 730, 735, 740, 924K, 930K, 938K, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245...
3261642
FILTER AS-WATER SEP & FUEL
3126B, 3406E, 3412E, 525B, 533, 535B, 543, 572R II, C-10, C-15, C-16, C15, C18, C32, CX31-C18I, CX35-C18I, D10R, D7R II, D8N, D8R, D8R II, D9R, PM-200, PM-201, TH48-E70, TK370, TK371, TK380, TK381
3126B, 3406E, 3412E, 525B, 533, 535B, 543, 572R II, C-10, C-15, C-16, C15, C18, C32, CX31-C18I, CX35-C18I, D10R, D7R II, D8N, D8R, D8R II, D9R, PM-200, PM-201, TH48-E70, TK370, TK371, TK380, TK381
1N4864
FILTER ELEMENT AS-AIR
375, 375 L, 5080, 69D, 776D, 777D, 784B, 784C, 785, 785B, 785C, AD40, AD45, AD45B, AD55, AE40, AE40 II, G3412, PM-201
375, 375 L, 5080, 69D, 776D, 777D, 784B, 784C, 785, 785B, 785C, AD40, AD45, AD45B, AD55, AE40, AE40 II, G3412, PM-201
4W5228
FILTER ELEMENT AS-AIR
375, 375 L, 5080, 69D, 776D, 777D, 784B, 784C, 785, 785B, 785C, AD40, AD45, AD45B, AD55, AE40, AE40 II, G3412, PM-201
375, 375 L, 5080, 69D, 776D, 777D, 784B, 784C, 785, 785B, 785C, AD40, AD45, AD45B, AD55, AE40, AE40 II, G3412, PM-201
1R0719
FILTER ELEMENT AS-OIL
120G, 120H, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16H, 16H NA, 517, 527, 528B, 530B, 561M, 589, 611, 613C, 613C II, 61...
120G, 120H, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16H, 16H NA, 517, 527, 528B, 530B, 561M, 589, 611, 613C, 613C II, 61...
1328875
FILTER ELEMENT AS-OIL
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 517, 527, 561M, 589...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 517, 527, 561M, 589...
1303212
FILTER-OIL
69D, 725C, 730C, 735B, 740B, 769D, 771D, 773D, 773E, 775D, 775E, AD30, AD45B, AD55, AD55B, AD60, D11T, RM-350B, SM-350
69D, 725C, 730C, 735B, 740B, 769D, 771D, 773D, 773E, 775D, 775E, AD30, AD45B, AD55, AD55B, AD60, D11T, RM-350B, SM-350
0775479
FILTER ELEMENT-OIL
AP-1000, AP-1050, PM-465, PM-565, PM-565B, RR-250, SS-250
AP-1000, AP-1050, PM-465, PM-565, PM-565B, RR-250, SS-250
1G5459
FILTER ELEMENT-OIL
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
8T3815
FILTER ELEMENT-OIL
PR-1000, PR-450, PR-450C
PR-1000, PR-450, PR-450C
7W5216
FILTER ELEMENT AS-AIR
5130, D9L, PM-565
5130, D9L, PM-565
1196215
FILTER ELEMENT-AIR
RM-350B, SM-350
RM-350B, SM-350
7R8237
FILTER-OIL
PR-1000
PR-1000
1179900
FILTER-OIL
AP-1050
AP-1050
1188013
FILTER GP-OIL
AP-1000, AP-1050, AP-800
AP-1000, AP-1050, AP-800
8T7479
FILTER ELEMENT-OIL
AP-1050, AP-1200, AP-800, PR-750B
AP-1050, AP-1200, AP-800, PR-750B
1C4295
FILTER GP-OIL
AP-1050, AP-1200, AP-800, PR-750B
AP-1050, AP-1200, AP-800, PR-750B
7R8373
FILTER ELEMENT-OIL
AP-1050
AP-1050
1G7202
FILTER-FUEL
AP-200B
AP-200B
1G7197
FILTER ELEMENT AS-AIR
AP-200B, CB-224C
AP-200B, CB-224C
8T7478
FILTER ELEMENT-OIL
AP-1000, AP-1200, AP-800, PR-750B, RR-250, SS-250
AP-1000, AP-1200, AP-800, PR-750B, RR-250, SS-250
7R6525
FILTER-COMPRESSED AIR
PM-565, PR-1000, PR-450C
PM-565, PR-1000, PR-450C
1C3860
FILTER-OIL
PR-1000, PR-750B
PR-1000, PR-750B
1G5459
FILTER ELEMENT-OIL
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350
PM-201, PM-465, PM-565, PM-565B, PR-1000, RM-350B, SM-350