2271197 FILTER-OIL Caterpillar parts
420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, 953D, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
Rating:
Alternative (cross code) number:
CA2271197
227-1197
2271197
CA2271197
227-1197
2271197
Weight: 0.01 pounds 0 kg.
BACKHOE LOADER, TRACK-TYPE TRACTOR,
Compatible equipment models: 2271197:
Number on catalog scheme:
For full view, you need register
Information:
Remove Crankshaft Front Seal And Wear Sleeve
Start By:a. remove vibration damper The crankshaft front seal and wear sleeve come as a set and must be installed as a set. If a replacement of the seal is to be made, a replacement of the wear sleeve must also be made. 1. Make at least three holes in seal (1) with a hammer and a sharp punch.2. Use tool (A) to remove seal (1). 3. Install tool (C) in the seal bore.4. Install tool (B) between tool(C) and wear sleeve (2). Turn tool (B) until the tool makes a dent (crease) in wear sleeve (2). Do this in three or more places until the wear sleeves is loose.5. Remove tools (B) and (C), then remove wear sleeve (2) from the crankshaft.Install Crankshaft Front Seal And Wear Sleeve
1. Install the front crankshaft seal and wear sleeve with tooling (D). Use the procedures which follows:a. Clean and make a preparation of the wear sleeve inside diameter and crankshaft outside diameter with 6V1541 Quick Cure Primer. Make an application of 9S3265 Retaining Compound to the crankshaft outside diameter before the wear sleeve is installed on the crankshaft. Do not let any Quick Cure Primer or Retaining Compound get on the lip of the seal.b. Install locator (3) and bolts (4) on the crankshaft.c. Seal (1) and wear sleeve (2) must be installed dry.
Make sure the seal is installed with the part number and the arrows showing crankshaft rotation toward the outside.
The front and rear seals and wear sleeves have different sprial grooves in the seal. Because of this type of design, the front seal group for an engine is different from the rear seal group. If a seal group is installed on the wrong end of the engine, oil can actually be taken out of the engine instead of moving the oil back into the engine.
d. Put wear sleeve (2) and seal (1) as a unit in position on locator (3).e. Put installer (5) in position on locator (3).f. Put clean engine oil on the face of nut (6) and its contact area on installer (5). Install nut (6) on locator (3).g. Tighten nut (6) until the inside surface of installer (5) comes in contact with locator (3).h. Remove tooling (D) from the crankshaft seal and wear sleeve. Tooling (D) will install the seal and wear sleeve to the correct depth on the crankshaft.End By:a. install vibration damper
Start By:a. remove vibration damper The crankshaft front seal and wear sleeve come as a set and must be installed as a set. If a replacement of the seal is to be made, a replacement of the wear sleeve must also be made. 1. Make at least three holes in seal (1) with a hammer and a sharp punch.2. Use tool (A) to remove seal (1). 3. Install tool (C) in the seal bore.4. Install tool (B) between tool(C) and wear sleeve (2). Turn tool (B) until the tool makes a dent (crease) in wear sleeve (2). Do this in three or more places until the wear sleeves is loose.5. Remove tools (B) and (C), then remove wear sleeve (2) from the crankshaft.Install Crankshaft Front Seal And Wear Sleeve
1. Install the front crankshaft seal and wear sleeve with tooling (D). Use the procedures which follows:a. Clean and make a preparation of the wear sleeve inside diameter and crankshaft outside diameter with 6V1541 Quick Cure Primer. Make an application of 9S3265 Retaining Compound to the crankshaft outside diameter before the wear sleeve is installed on the crankshaft. Do not let any Quick Cure Primer or Retaining Compound get on the lip of the seal.b. Install locator (3) and bolts (4) on the crankshaft.c. Seal (1) and wear sleeve (2) must be installed dry.
Make sure the seal is installed with the part number and the arrows showing crankshaft rotation toward the outside.
The front and rear seals and wear sleeves have different sprial grooves in the seal. Because of this type of design, the front seal group for an engine is different from the rear seal group. If a seal group is installed on the wrong end of the engine, oil can actually be taken out of the engine instead of moving the oil back into the engine.
d. Put wear sleeve (2) and seal (1) as a unit in position on locator (3).e. Put installer (5) in position on locator (3).f. Put clean engine oil on the face of nut (6) and its contact area on installer (5). Install nut (6) on locator (3).g. Tighten nut (6) until the inside surface of installer (5) comes in contact with locator (3).h. Remove tooling (D) from the crankshaft seal and wear sleeve. Tooling (D) will install the seal and wear sleeve to the correct depth on the crankshaft.End By:a. install vibration damper
Cat SIS web machinery list:
Parts filter Caterpillar catalog:
953D, 963D, D5R LGP, D6K, D6K LGP, D6K XL, D6N, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, PL61
621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 740, 770G, 772G, 953D, 963D, 973D, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
583T, 587R, 587T, 770G, 770G OEM, 772G, 772G OEM, 953D, 963D, 973D, D10T, D11T, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D7E, D7E LGP, D8T, D9T, PL61,...
5130, 5130B, 5230, 5230B, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 784B, 785, 785B, 789B, 793B, 793C, D5N, D5R LGP, D6N, D8L, D9L
517, 527, D5N, D5R LGP, D6N, D6N LGP
769D, 770, 770G, 771D, 772, 772G, 773D, 773E, 773F, 775D, 775E, 775F, 776D, 777D, 777F, 777G, 824C, 854G, 938H, 950H, 962H, 966H, 972H, 980C, D5R LGP, D6N, D6N LGP, D6N OEM, D8N, IT38H, IT62H, MH3037,...
120M 2, 12M 2, 140M 2, 160M 2, 583T, 584, 587R, 587T, 773D, 773E, 777G, 785D, 793D, 953D, 963D, 973D, 980G II, D6K, D6K LGP, D6K XL, D6N, D6T, D6T LGP, D6T LGPPAT, D6T XL, D8R II, D8T, PL61, R1700G
953D, 963D, D5R LGP, D6K, D6K LGP, D6K XL, D6N, PL61
953D, 963D, D5R LGP, D6K, D6K LGP, D6K XL, D6N, PL61
2384C, 2484C, 559C, 579C, 966F II, AP1000E, AP1055E, BG1000E, BG1055E, D6K2, D6K2 LGP, D6N LGP, D6N OEM
2384C, 2484C, 559C, 579C, 966F II, AP1000E, AP1055E, BG1000E, BG1055E, D6K2, D6K2 LGP, D6N LGP, D6N OEM
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, D6K2, D6K2 LGP, D6N LGP, D6N OEM
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315C, 320D2, 320D2 GC, 320D2 L, AP-650B, AP-800D, C4.4, CB-434D, CB-534D, CB-564D, CP-433E, CP-533E, CS-323C, CS-423E, CS-433E, CS-533E, M313C...
315C, 315D L, 318C, 319C, 319D, 319D LN, AP-650B, AP-800D, C4.4, C4.4XQ100, C4.4XQ80, CB-534D, CB-54, CB-564D, CB-64, CP-44, CP-533E, CS-44, CS-533E, CS-54, PS-360C, TH220B, TH330B, TH340B, TH350B, TH...
315C, 315D L, 318C, 319C, 319D, 319D LN, AP-650B, AP-800D, C4.4, C4.4XQ100, C4.4XQ80, CB-534D, CB-54, CB-564D, CB-64, CP-44, CP-533E, CS-44, CS-533E, CS-54, PS-360C, TH220B, TH330B, TH340B, TH350B, TH...
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 301.5, 301.6C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.5, 302.5C, 302.7D, 303.5, 303.5C, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304...
2254173
FILTER ELEMENT-CAB AIR
TH210, TH215
TH210, TH215
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
2855098
FILTER GP-FUEL
414E, 416E, 416F, 420E, 420F, 422F, 428F, 430E, 430F, 432F, 434F, 444F
414E, 416E, 416F, 420E, 420F, 422F, 428F, 430E, 430F, 432F, 434F, 444F
416D, 416E, 420D, 420E, 430D, 430E
3054C, 3054E, M313C, M315C, TH460B
621H, 953C, 963C, 973C, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
583T, 587R, 587T, 795F AC, 795F XQ, PL83, PL87, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B