2299047 FILTER ELEMENT-CAB AIR Caterpillar parts
308C, 314C, 321C, 321D LCR, 325C, 328D LCR
Rating:
Alternative (cross code) number:
CA2299047
229-9047
2299047
CA2299047
229-9047
2299047
Weight: 0.28 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
You can buy:
US$49.99
15 Jul 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Cab Air Filter 229-9047 2299047 for Caterpillar Excavator 314C 308C 321C 321D LCR 325C 328D LCR
MASBYJX Part Number: 229-9047 2299047 || Applicable models: Fit for Caterpillar Excavator 314C 308C 321C 321D LCR 325C 328D LCR || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MASBYJX Part Number: 229-9047 2299047 || Applicable models: Fit for Caterpillar Excavator 314C 308C 321C 321D LCR 325C 328D LCR || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
E307C Cabin Air Filter 2299047 YN50V01006P1P 51186-41870 Compatible with New Holland E215
Generic Meets or exceeds all original equipment specif ications || Engineered andmanufactured s pecifically for repair applications || Ensure Fitment: Please check the part number and excavator model to ensure the product fits your needs.
Generic Meets or exceeds all original equipment specif ications || Engineered andmanufactured s pecifically for repair applications || Ensure Fitment: Please check the part number and excavator model to ensure the product fits your needs.
High Efficiency Cab Air Filter 51186-41930 YN50V01006P1 SC 80005 2299047 Compatible with Kobelco
Generic 【PACKAGE INCLUDES】1*Filter. || 【FEATURES】Designed to filter out various impurities in the engine fuel system. It reduces mechanical wear, ensures stable engine operation and improves reliability. || 【INSTALLATION INSTRUCTIONS】Please recycle the used filter.Don't reuse.After installing a new filter, prime and start the engine and wait for a few minutes, then check for leakage. || 【Premium material】The filter is made from good-quality aluminum and rubber, which is durable, stable in performance, and not easy to break or deform. || 【NOTE】Different part numbers represent different parts, please check your manual for specific parameters.
Generic 【PACKAGE INCLUDES】1*Filter. || 【FEATURES】Designed to filter out various impurities in the engine fuel system. It reduces mechanical wear, ensures stable engine operation and improves reliability. || 【INSTALLATION INSTRUCTIONS】Please recycle the used filter.Don't reuse.After installing a new filter, prime and start the engine and wait for a few minutes, then check for leakage. || 【Premium material】The filter is made from good-quality aluminum and rubber, which is durable, stable in performance, and not easy to break or deform. || 【NOTE】Different part numbers represent different parts, please check your manual for specific parameters.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2299047:
Information:
System Operation Description:Warning Lamp OperationA warning lamp is required if the "Engine Monitoring" feature is used. The warning lamp indicates an active problem with one of the monitored conditions such as high coolant temperature. A flashing warning lamp indicates that the engine is derating power. The warning lamp will turn on for a minimum of two seconds after the engine has started.Option 1 Programming the "Engine Monitoring Lamps" parameter to "Option 1" requires three lamps. P1:29 (Warning Lamp) is connected to the lamp for low oil pressure. P1:30 (Output #1) is connected to the lamp for low coolant level. P1:31 (Output #9) is connected to the lamp for high coolant temperature.If a Coolant Level Sensor is not installed or the "Engine Monitoring Lamps" parameter is programmed to "Warning Lamp", then J1/P1:30 will function as a PTO Switch On Lamp output. The parameter for the "Coolant Level Sensor" must be programmed to "NO" if the sensor is not installed.When "Option 1" is programmed the following lamps will not be available:
"Warning Lamp" as J1/P1:29
"PTO Switch On Lamp" as J1/P1:30
"Change Oil Lamp" as J1/P1:30
"Fast Idle Enable Lamp" as J1/P1:31
"Wait To Start Lamp" as J1/P1:31Electrical Connection of LampsOne terminal of the lamp must be connected to battery voltage through the vehicle wiring. The other terminal is connected to the ECM at the ECM vehicle harness connector J1/P1 at the following terminal:
J1/P1:29 (Warning Lamp or Low Oil Pressure Lamp)
J1/P1:30 (PTO Switch On Lamp or Low Coolant Level Lamp)
J1/P1:31 (High Coolant Temperature Lamp, Fast Idle Enable Lamp, or Wait To Start Lamp)The ECM provides a path to ground in order to turn the lamp ON.
Illustration 1 g00943243
Circuit schematic for the warning lamp
Illustration 2 g00943244
Pin locations for the warning lamp circuitTest Step 1. Inspect Electrical Connectors and Wiring
Thoroughly inspect the J1/P1 ECM connector, the firewall bulkhead connector, and terminal 29. Refer to Illustration 2. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that is associated with the suspect terminal for the lamp.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the harness and wiring for abrasion and pinch points from the battery to the ECM.Expected Result:All connectors, pins and sockets should be completely coupled and/or inserted and the harness and wiring should be free of corrosion, abrasion or pinch points.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled.STOPTest Step 2. Check for Normal Operation of the Warning Lamp (s)
Monitor the warning lamp. Turn the key switch to the ON position, while the engine is off. The lamp should turn on for five seconds. Then, the lamp should turn off.The lamp will continue flashing if there is an active diagnostic code. If there is an active diagnostic code, connect the Caterpillar Electronic
"Warning Lamp" as J1/P1:29
"PTO Switch On Lamp" as J1/P1:30
"Change Oil Lamp" as J1/P1:30
"Fast Idle Enable Lamp" as J1/P1:31
"Wait To Start Lamp" as J1/P1:31Electrical Connection of LampsOne terminal of the lamp must be connected to battery voltage through the vehicle wiring. The other terminal is connected to the ECM at the ECM vehicle harness connector J1/P1 at the following terminal:
J1/P1:29 (Warning Lamp or Low Oil Pressure Lamp)
J1/P1:30 (PTO Switch On Lamp or Low Coolant Level Lamp)
J1/P1:31 (High Coolant Temperature Lamp, Fast Idle Enable Lamp, or Wait To Start Lamp)The ECM provides a path to ground in order to turn the lamp ON.
Illustration 1 g00943243
Circuit schematic for the warning lamp
Illustration 2 g00943244
Pin locations for the warning lamp circuitTest Step 1. Inspect Electrical Connectors and Wiring
Thoroughly inspect the J1/P1 ECM connector, the firewall bulkhead connector, and terminal 29. Refer to Illustration 2. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that is associated with the suspect terminal for the lamp.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the harness and wiring for abrasion and pinch points from the battery to the ECM.Expected Result:All connectors, pins and sockets should be completely coupled and/or inserted and the harness and wiring should be free of corrosion, abrasion or pinch points.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled.STOPTest Step 2. Check for Normal Operation of the Warning Lamp (s)
Monitor the warning lamp. Turn the key switch to the ON position, while the engine is off. The lamp should turn on for five seconds. Then, the lamp should turn off.The lamp will continue flashing if there is an active diagnostic code. If there is an active diagnostic code, connect the Caterpillar Electronic
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D, 319D L, 320C, 320C FM, 320D, 320D FM, 320D FM R...
311B, 311C, 311D LRR, 312B, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 910G
311B, 311C, 311D LRR, 312B, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR
1090, 1190, 1190T, 1290T, 312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 533, 543, HA770, HA771, HA870, HA871, M313C, M315C, M316C...
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 314D CR, 314D LCR, 314E CR, 315D L, 316E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E RR, 321C, 321D LCR, 323D L, 323D...
322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E...
320B, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321B, 321C, 321...
320B, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321B, 321C, 321...
320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN,...
324D, 324D L, 324E, 325D L, 328D LCR, 329D, 329D L, 329E, 330D L, 336D, 336D2, 336E
325C, 345B II, 345C, 345D, 345D L, 349D, 349D L, 349E
308C, 314C, 321C, 325C
308C, 314C, 321C
303, 304, 305, 307B
303, 304, 305
303.5C, 303.5D, 303C CR, 304, 304C CR, 304D CR, 305, 305.5D, 305C CR, 305D CR, 904B, 904H
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 312C, 312D, 315C, 315D L, 318C, 319C, 319D, 320C, 320C L, 320D, 320E L, 322C, 322C FM, 323D L, 323D LN, 324D, 324D FM, 324D FM LL, 324D L,...
302.5C, 303, 304
2228244
FILTER ELEMENT-BREATHER
318C, 319C
318C, 319C
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR