2335184 FILTER ELEMENT AS-AIR Caterpillar parts
3054, 3054B, 3054C, 3054E, C4.4
Rating:
Alternative (cross code) number:
CA2335184
233-5184
2335184
CA2335184
233-5184
2335184
Weight: 0.50 pounds 0 kg.
GENERATOR SET, INDUSTRIAL ENGINE,
Cross Reference:
ALCO FILTER
MD-7488S,
ASAS
HF 5182,
BALDWIN
RS4679,
CATERPILLAR
233-5184,
COOPERSFIAAM FILTERS
FLI6927,
JOHN DEERE
ER263059,
DONALDSON
P783731,
FIL FILTER
HP 2640,
FILMAR
RA6146,
FLEETGUARD
AF25794,
FRAM
CA5741SY,
GUD FILTERS
ADG 1132R,
LAUTRETTE
FA 3483,
MISFAT
R579,
SAKURA Automotive
A-5148,
A-8607,
SPERRY NEW HOLLAND
85814175,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Veyronix 49181 ENGINE Air Filter Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE Replaces Caterpillar 2335184, Wix 49181
Veyronix Replaces 49181 Replaces BALDWIN RS4679, CARQUEST 83181, Caterpillar 233-5184 2335184, Wix 49181 || Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE || Compatible With John Deere Wheeled tractor 5415 5515 5615 5215 5315V 5415 5315 5015 5515 || Manufactured to OEM standards and rigorously tested at the factory || Outer Air Filter; Height 12.83 inch, Largest OD 3.72 inch, Largest ID 2.92 inch || Package Includes: 1x Air Filter 49181
Veyronix Replaces 49181 Replaces BALDWIN RS4679, CARQUEST 83181, Caterpillar 233-5184 2335184, Wix 49181 || Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE || Compatible With John Deere Wheeled tractor 5415 5515 5615 5215 5315V 5415 5315 5015 5515 || Manufactured to OEM standards and rigorously tested at the factory || Outer Air Filter; Height 12.83 inch, Largest OD 3.72 inch, Largest ID 2.92 inch || Package Includes: 1x Air Filter 49181
Engine Air Filter 233-5184 2335184 for Caterpilla ENGINE INDUSTRIAL 3054C 3054 3054B 3054E C4.4 ENGINE GENERATOR SET C4.4
MASBYJX Part Number: 233-5184 2335184 || Applicable models: Fit for Caterpillar ENGINE - INDUSTRIAL 3054C 3054 3054B 3054E C4.4 ENGINE - GENERATOR SET C4.4 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MASBYJX Part Number: 233-5184 2335184 || Applicable models: Fit for Caterpillar ENGINE - INDUSTRIAL 3054C 3054 3054B 3054E C4.4 ENGINE - GENERATOR SET C4.4 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Veyronix 233-5184 ENGINE Air Filter Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE Replaces Caterpillar 2335184
Veyronix Part Number: 233-5184 2335184 Replaces Caterpillar 233-5184 2335184, BALDWIN RS4679, CARQUEST 83181, NEW HOLLAND 85814175, JOHN DEERE ER263059, VMC AF783731, PERKINS 26510381, MANITOU 52654714 || Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE || Compatible With John Deere Wheeled tractor 5415 5515 5615 5215 5315V 5415 5315 5015 5515 || Compatible With 2003 MANITOU ML635, MLT1035, MLT634,MLT735, MLT741, MLT845, MLT731, MT1235, MT1240, MT1335, MT1340, MT1435, MT1440, MT1740, MT940, MT1030SS2, MT1235, MVT665T Series Telescopic loader (Partial 2006, 2010, 2014, 2019 Models) || Manufactured to OEM standards and rigorously tested at the factory || Inner Air Filter; Height 12.83 inch, Largest OD 3.72 inch, Largest ID 2.92 inch
Veyronix Part Number: 233-5184 2335184 Replaces Caterpillar 233-5184 2335184, BALDWIN RS4679, CARQUEST 83181, NEW HOLLAND 85814175, JOHN DEERE ER263059, VMC AF783731, PERKINS 26510381, MANITOU 52654714 || Compatible With Caterpillar 3054C 3054 3054B 3054E C4.4 ENGINE || Compatible With John Deere Wheeled tractor 5415 5515 5615 5215 5315V 5415 5315 5015 5515 || Compatible With 2003 MANITOU ML635, MLT1035, MLT634,MLT735, MLT741, MLT845, MLT731, MT1235, MT1240, MT1335, MT1340, MT1435, MT1440, MT1740, MT940, MT1030SS2, MT1235, MVT665T Series Telescopic loader (Partial 2006, 2010, 2014, 2019 Models) || Manufactured to OEM standards and rigorously tested at the factory || Inner Air Filter; Height 12.83 inch, Largest OD 3.72 inch, Largest ID 2.92 inch
This part in 10 request:
Show.
This information for suppliers only!
2024-10-09
2024-09-05
2024-09-05
2023-09-02
2023-08-03
2023-07-16
2023-07-11
2023-02-06
2021-06-29
2018-06-10
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 2335184:
Information:
High voltage levels are present within the UPS. The UPS should be opened only by service personnel that are qualified. The UPS must have a proper ground connection to earth.
Failure to connect the unit to a suitable grounding electrode creates an electrical shock hazard. An electrical shock will result in serious personal injury or death.
Personal Protective Equipment (PPE) suitable to the work being performed must be worn when performing maintenance on the UPS.
High voltage is present. Work on this equipment must be performed by authorized trained personnel. Personnel must be wearing Personal Protective Equipment that meets regulatory requirements to protect the body for the work that is being performed. Failure to use appropriate PPE to protect the body will result in serious personal injury or death.
Performing maintenance inspections with power supplied to the UPS may result in serious personal injury or death. When using an external maintenance bypass, the UPS can be fully de-energized. When using an internal maintenance bypass, the UPS is not fully de-energized. Refer to the Building System Schematic to ensure that all necessary precautions have been taken before performing any maintenance procedure. Use lock out and tag out procedures as required.
Verify that the UPS is configured for the Test mode before beginning this test as follows:
Place the MAINS 1 (Q1) input switch in the On (closed) position.
Place the MAINS 2 (Q4S) input switch in the ON (closed) position.
Place the output switch in the ON (closed) position.
Place the battery disconnects in the ON (closed) position.
Place the internal maintenance bypass switch in the ON (closed) position to ensure that the power is not lost to the load of the customer.
Select "Manual Mode" from the maintenance option with the UPS Tuner service tool that is connected to the unit.
Increase the DC bus voltage gradually. When the DC bus voltage reaches 630 VDC and you exit from the "Manual Mode", all cooling fans should start.
Illustration 1 g02112699
Verify the following:
The "PFC ON" LED (52) is illuminated green on the graphical display.
If the automatic start is enabled, the inverter automatically couples upon power-up and the output bus is supplied via the inverter.
The LED light for the "UPS ON" (49) is illuminated on the graphical display.
Press and hold the OFF button (46) on the display for 3 seconds to stop the inverter.
Silence any remaining alarms.The total DC bus voltage is 800 vdc. The voltage is split into two halves at plus 400 vdc or minus 400 vdc.
Illustration 2 g02162353
Measuring the DC bus voltageObserve all safety precautions and use appropriate PPE when measuring the DC bus voltage.Measure the DC output bus as follows:
Verify the upper DC bus voltage 400 vdc +/- 4 vdc. The voltage is measured from DC positive to the middle point of the FIAZN
Verify that the lower DC bus voltage is -400 vdc +/- 4 vdc. The voltage is measured from the middle point of the FIAZN to DC negative.
Failure to connect the unit to a suitable grounding electrode creates an electrical shock hazard. An electrical shock will result in serious personal injury or death.
Personal Protective Equipment (PPE) suitable to the work being performed must be worn when performing maintenance on the UPS.
High voltage is present. Work on this equipment must be performed by authorized trained personnel. Personnel must be wearing Personal Protective Equipment that meets regulatory requirements to protect the body for the work that is being performed. Failure to use appropriate PPE to protect the body will result in serious personal injury or death.
Performing maintenance inspections with power supplied to the UPS may result in serious personal injury or death. When using an external maintenance bypass, the UPS can be fully de-energized. When using an internal maintenance bypass, the UPS is not fully de-energized. Refer to the Building System Schematic to ensure that all necessary precautions have been taken before performing any maintenance procedure. Use lock out and tag out procedures as required.
Verify that the UPS is configured for the Test mode before beginning this test as follows:
Place the MAINS 1 (Q1) input switch in the On (closed) position.
Place the MAINS 2 (Q4S) input switch in the ON (closed) position.
Place the output switch in the ON (closed) position.
Place the battery disconnects in the ON (closed) position.
Place the internal maintenance bypass switch in the ON (closed) position to ensure that the power is not lost to the load of the customer.
Select "Manual Mode" from the maintenance option with the UPS Tuner service tool that is connected to the unit.
Increase the DC bus voltage gradually. When the DC bus voltage reaches 630 VDC and you exit from the "Manual Mode", all cooling fans should start.
Illustration 1 g02112699
Verify the following:
The "PFC ON" LED (52) is illuminated green on the graphical display.
If the automatic start is enabled, the inverter automatically couples upon power-up and the output bus is supplied via the inverter.
The LED light for the "UPS ON" (49) is illuminated on the graphical display.
Press and hold the OFF button (46) on the display for 3 seconds to stop the inverter.
Silence any remaining alarms.The total DC bus voltage is 800 vdc. The voltage is split into two halves at plus 400 vdc or minus 400 vdc.
Illustration 2 g02162353
Measuring the DC bus voltageObserve all safety precautions and use appropriate PPE when measuring the DC bus voltage.Measure the DC output bus as follows:
Verify the upper DC bus voltage 400 vdc +/- 4 vdc. The voltage is measured from DC positive to the middle point of the FIAZN
Verify that the lower DC bus voltage is -400 vdc +/- 4 vdc. The voltage is measured from the middle point of the FIAZN to DC negative.
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
3014, 3024, 3024C, 3054, C2.2
C4.4, C6.6, CB-521, CB-525B, PS-300
3056E, 550B, 560B, 564, 574B, 924G, 924GZ, 930G, C4.4, IT28G, M316C, M318C, M318C MH, M322C
3054, 3054B, 3054C, 3054E, C4.4
3054, 3054B, 3054C, C4.4
3054, 3054B, 3054C, C4.4
C4.4
120M, 12M, 559, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 953D, 963D, C4.4, C6.6, C7.1, D6K LGP, D6N, IT14G, IT14G2, IT38H, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D,...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, AP-300, AP-300D, C3.3, C4.4, C7.1, CD-54, CP-533E, CS-533E
3054, 3054B, 3054C, 3054E, C4.4
3056E, 550B, 560B, 564, 574B, 924G, 924GZ, 930G, C4.4, IT28G, M316C, M318C, M318C MH, M322C
C4.4, C6.6, CB-521, CB-525B, PS-300
2884110
FILTER GP-ENGINE OIL
C4.4, C6.6
C4.4, C6.6
773F, 775F, 777F, C27, C32, D10T, TH48-E70
3516C, 3606, 3608, 3612, 3616, 793C, 793D, C280-12, C280-16, C280-6, C280-8
3054, 3054B, 3054C, C4.4
3054, 3054B, C4.4
3054, 3054B, 3054C, C4.4